Perkins 4.107 / 4.108M / 4.99 Engine Parts

High performance electrical relay with mounting bracket suitable for high current switching. Details: 12v 100 amp Dimensions 4.5cm x 4.5cm x 7cm C...

Quality aftermarket 14 Volt 70 Amp Insulated return alternator 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree an...

Aftermarket alternator wiring connector kit, commonly known as a 'euro connector'. Fits many standard 3 pin alternators. UK, European and Worldwide...

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overh...

High quality SI-ACR Blue Water 12 or 24v automatic battery charging relay designed in the USA. Automatically combines batteries during charging, is...

High quality Blue Water 12 or 24v automatic battery charging kit designed in the USA. The kit includes two products, a Dual Circuit Plus battery sw...

Aftermarket Delphi blanking plug kit for Filter Assembly includes: x2 Blanking plugs (1/2"UNF thread) x2 Blanking plug copper washers x1 Air v...

Delphi fuel filter assembly Drain Plug and sealing washer. Thread diameter 7.5mm UK, European and worldwide shipping is available.

A quality flexible drive shaft coupling for connecting the gearbox output flange to the propeller drive flange. Manufactured by R & D Marine th...

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Syn...

Exopro classic engine Mineral oil SAE 20W-50. An oil suitable for both petrol and diesel engines. Details: Hi zinc content for ultimate protection...

A quality aftermarket heavy duty zinc shaft anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppl...

JB Marine Weld is a specially formulated two-part steel reinforced epoxy cold weld system that provides for strong, lasting repairs for bonding dif...

JB MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar s...

Liqui Molly Anti-bacterial Diesel additive is a highly effective biocide designed to protect against bacteria, yeast and mold. Ideally suited for p...

Liqui Molly Battery Clamp Grease. A Specially formulated grease that protects battery terminals and electrical contacts from corrosion and oxidatio...

Liqui Molly Diesel Purge additive is designed to remove deposits on injection nozzles and combustion chambers as well as boosting the cetane number...

Liqui Molly installation paste. A high-performance tungsten disulfide paste for heavy-duty applications. Adheres even to apparently smooth surfaces...

High quality Liqui Moly Marine Antifreeze 5L. This is a Glycerin and water based product offering excellent winter protection. Liqui Moly aim to pr...

Liqui Molly Marine ATF oil is specially developed for the marine sector and is based on synthetic technology and the latest additive technology. It...

Liqui Molly Marine Diesel Protect, a solution for bacteria, yeast and mold, suitable for reliable long-term preservation. Maintains and protects th...

Liqui Molly Marine Grease, is a long-lasting heavy-duty grease that reduces friction and wear. It has excellent aging and shear stability. Liqui M...

Liqui Molly Marine Multi-spray aerosol, specifically designed for marine purposes to protect and preserve. Keeps moving parts moving and protects a...

Liqui Molly Marine Universal Cleaner, a low-foaming, biodegradable boat cleaner with outstanding cleaning performance. Dissolves even stubborn accu...

A Lucas heavy duty relay with detachable mounting bracket. These high quality waterproof relays were extensively used on Perkins marine wiring loom...

Lucas Extreme Duty Marine ATF is a blend of synthetic base oils and a special additive package designed to create a high friction fluid that allows...

Standard ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engin...

MPM propeller shaft grease is specially developed for marine applications. The grease has a very high resistance to water washout and is therefore ...

Lloyds Approved Nautilus Marine Exhaust Hose. This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced...

A robust oil filter wrench from Draper, ideal to remove your Perkins 4.108 screw-on oil filter Specification: Maximum oil filer diameter 100 mm Pl...

High quality aftermarket Perkins 4.107 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted altern...

High quality aftermarket 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.107 engines set up for a 'three lug' mounted ...

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.107. These standard belts are p...

Quality aftermarket 12 Volt 90 Amp Insulated return high output alternator for Perkins 4.107 marine engines set up for a 'three lug' mounted altern...

A very comprehensive set of quality aftermarket gaskets and seals for the bottom end of your Perkins 4.107, including marine versions. water pump ...

A Perkins 4.107 aftermarket exhaust outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 deg...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.107. This is a high quality original equipment part as supplied by ...

Bowman oil cooler end cover for Perkins 4.107Dimensions are: Internal hole size 52 mm and 28 mm length 55 mm UK, European and Worldwide delivery ...

Perkins 4.107 Standard oil cooler designed for use on marine transmissions by Bowman. Features cupro-nickel tubes for long life expectancy and neop...

High quality aftermarket Perkins 4.107 breather pipe kit replaces the right angle hose located between the rocker cover and the inlet cowl on all f...

A quality set of aftermarket connecting rod bearings (big ends) to fit all Perkins 4.107 engines. The following sizes are available: Standard -0.0...

Quality aftermarket Perkins 4.107 Core Plug set, details: Set of 9 Anodised mild steel core plugs x6  1 1/4" x1  1" x2  7/8" UK, European and Wor...

A quality Perkins 4.107 aftermarket crankshaft to fit all versions of these engines including marine.UK, European and worldwide shipping available.

Aftermarket Rear crankshaft upgrade kit, the 'Achilles heel' of Perkins 4.107 design is the crankshaft rear rope seal which is notorious for leakin...

We are pleased to offer fully reconditioned Perkins 4.107 DPA injector pump. The pumps are disassembled, completely cleaned, inspected and all worn...

We are pleased to offer fully reconditioned Perkins 4.107 injector pump. These pumps are disassembled, completely cleaned, inspected and all worn p...

Perkins 4.107 Coolant drain tap. This is a quality aftermarket part manufactured for Parts4engines. Details: Fully machined from solid brass Threa...

This is a Perkins 4.107 drip rail; This is the fuel return pipe connecting the top of the injectors back to the filter housing. We now manufacture ...