Produkter

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth c...

We have recently sourced a limited number of new (old stock) Perkins 4.99 & 4.107 mechanically governed injector pumps. These pumps have been i...

Reconditioned Perkins 4.107 injector. These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We al...

A set of replacement heat exchanger and (oil cooler lowline only) O seals. The early 4.99 4.107 & 4.108 kit comprises 4 Nitrile BS343 70S heat ...

Quality aftermarket Perkins 4.99 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator. ...

These quality aftermarket 12 volt 65 amp alternators fit all versions, including the marine version of Perkins 4.99 engines set up for a 'three lug...

Excellent quality aftermarket alternator and water pump drive belts which are the correct fitment for standard Perkins 4.99 engines. These standard...

Quality aftermarket 12 volt 90 amp high output alternators fit all versions Perkins 4.99 (including marine) of these engines set up for a 'three lu...

A very comprehensive set of high quality aftermarket gaskets and seals for the bottom end of your Perkins 4.99, including marine versions. water p...

A Perkins 4.99 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details:...

Combined Bowman exhaust manifold and heat exchanger that fits Perkins 4.99. This is a high quality original equipment part as supplied by Perkins i...

Genuine Bowman 3366 oil cooler end covers for Perkins 4.99 engines. Dimensions are: Internal hole size 52mm and 28mm length 55mm UK, European and...

Standard oil cooler designed for use on marine transmissions from Bowman for Perkins 4.99. Features cupro-nickel tubes for long life expectancy and...

Quality aftermarket Perkins 4.99 breather hose kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory...

A genuine Perkins 4.99 cam follower. UK, European and Worldwide shipping available.

We have a number of used but in very good condition Perkins 4.99 OE camshafts. These camshafts are no longer available for Perkins. UK, European an...

A rare find! We have a small number of good, used Perkins 4.99 connecting rod available. Small end bushes are serviceable with no apparent wear.The...

A quality aftermarket set of connecting rod bearings fit Perkins 4.99 engine. They can be supplied in the following sizes: Standard -0.010" -0.020...

Quality aftermarket Perkins 4.99 Core Plug set, details: Set of 9 Anodised mild steel core plugs x6  1 1/4" x1  1" x2  7/8" UK, European and Worl...

Perkins 4.99 crankshaft, a quality aftermarket product manufactured to OE specifications. It fits all versions of these engines including marine. T...

A comprehensive aftermarket rear crankshaft oil seal upgrade kit for Perkins 4.99 engines. The 'Achilles heel' of these engine designs is the crank...

We are pleased to offer fully reconditioned Perkins 4.99 DPA pumps. These are disassembled, completely cleaned, inspected and all worn parts are re...

Coolant drain tap for this Perkins 4.99 engine. This is a quality aftermarket part and is fully machined from solid brass. These drain taps have ta...

An aftermarket Perkins 4.99 drip rail; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins ...

High quality aftermarket engine mounts for Perkins 4.99 marine engines. Fitting the correct type of mount for the weight and use of your engine is ...

We can now offer an upgraded exhaust elbow connector for Perkins 4.107 marine engines. With time the original cast iron part will fail due to corro...

A pair of aftermarket Perkins 4.99 exhaust manifold gaskets. These are suitable for all versions of this engine and fit between the cylinder head a...

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.99 engines. total length = 50mm stud protrudes 37mm form cylinder head face U...

Quality aftermarket Exhaust elbow Outlet Gasket for Perkins 4.99 marine engines. Available for 4 or 5 hole outlets. UK, European and Worldwide ship...

Quality aftermarket Perkins 4.99 Front crankshaft oil seal. UK, European and Worldwide shipping available.

Replacement Perkins fuel filter assembly for Perkins 4.99engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitting...

'Two bolt' Perkins 4.99 diesel lift pump kit. This is a high quality aftermarket pump manufactured for us in Europe. This is very well engineered a...

A replacement aftermarket fuel line kit for your Perkins 4-99 with soft copper pipes cut over sized and supplied with a pipe cutter so you can achi...

Aftermarket fuel washers and seal kit for Perkins 4.99 Series engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washer...

A set of quality aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.99. We stock both options for either the mechan...

Quality aftermarket Perkins 4.99 12v heater plug (thermostart). It can be supplied with either the 'Spade' or 'Screw' type electrical connection. ...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.99, supplied with a high temperature switch. Ideal for marine use, as it gives a...

Aftermarket starter/ignition switch for Perkins 4.99 engines, we offer two switch options, which have either 4 pin or 6 pin electrical connections ...

Genuine Perkins 4.99 injector flange / clamp. Can be simply replaced if broken by removing the injector nozzle. UK, European and Worldwide shipping...

Quality aftermarket Perkins 4.99 Jabsco raw water pump drive. This part is only suitable for Jabsco raw water Pump UK, European and Worldwide shipp...

High quality aftermarket Perkins 4.99 Jabsco raw water pump drive shaft coupling. UK, European and Worldwide shipping available.

High quality aftermarket Perkins 4.99 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to t...

A quality aftermarket Perkins 4.99 tab washer kit includes: x1 Flywheel locking tab washer - prevents the flywheel to crank bolts from working loo...

Low oil pressure alarm for Perkins 4.99 is a quality aftermarket bulkhead mounted warning alarm, to be used in conjunction with an oil pressure swi...

This quality set of aftermarket main bearings fit all versions of Perkins 4.99 engine. They can be supplied at the following sizes: Standard -0.01...

A set of lubricating oil and fuel filters for servicing your Perkins 4.99 engine. The set comes with seals for each of the filters. This is a paper...

High quality aftermarket Oil filler cap for Perkins 4.99 engines. There are two sizes available: Cap diameters: For marine engines 62mm diameter o...

Perkins 4.99 Oil Filter Conversion kit. If you have one of the early marine versions of these engines with the paper oil filters inside a re-usabl...