Perkins 4.108M Engine Parts

We are pleased to offer a Perkins 4.108 DPA injector pump repair service . The pumps are disassembled, completely cleaned, inspected and worn parts...

Perkins manufactured three marinised versions of Perkins 4.108 engines over the years, each with different options for the header tank used. See ph...

Genuine Perkins 4.108 Injector pipes to fit engines with a mechanically governed injector pump. (See photos to view a mechanically governed pump) ...

Replacement Perkins fuel filter assembly for Perkins 4.108 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

Aftermarket Perkins 4.108 high quality water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimente...

A high-quality replacement aftermarket fuel line kit for your Perkins 4.108 with soft copper pipes cut oversized and supplied with a pipe cutter so...

Genuine Perkins 4.108 injector flange / clamp. Can be simply replaced if broken by removing the injector nozzle. UK, European and Worldwide shippin...

Reconditioned Perkins 4.108 injector. These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We al...

High quality aftermarket fuel banjo bolt set, includes: x4 Banjo bolts UK, European and Worldwide shipping available.

Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel. Details: Add to the...

Genuine Perkins 4.108 Injector pipes to fit the lowline marine engine version, with the following build codes: ED13630, ED13631, ED22111, ED22714, ...

Delphi fuel filter assembly Drain Plug and sealing washer. Thread diameter 7.5mm UK, European and worldwide shipping is available.

Aftermarket Delphi blanking plug kit for Filter Assembly includes: x2 Blanking plugs (1/2"UNF thread) x2 Blanking plug copper washers x1 Air v...

High quality aftermarket Perkins 4.108 Water pump back plate fitted between the water pump and the engine block. Two options are available: Mild s...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108 'lowline' engines. These are high quality nitrile rubber seals, manufact...

Aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.108 with 2 options available: Earth return sender - uses the outer casing t...

Quality aftermarket Perkins 4.108 Water pumps manufactured specifically for us and to our high quality requirements. They are available with either...

Aftermarket Perkins 4.108 thermostat kit with the correct 82oC opening temperature for automotive and industrial applications. For marine applicati...

A pair of high quality aftermarket end caps for the later versions of the Perkins 4108M marine engine fitted with 'Bowman' type heat exchanger. The...

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK, European and Worldwide shipping available.

Liqui Molly Marine Diesel Protect, a solution for bacteria, yeast and mold, suitable for reliable long-term preservation. Maintains and protects th...

Aftermarket Perkins 4.108 Injector pump Anti stall valve for use on injector pumps with an Hydraulic Governor. Includes: Anti stall valve fixi...

A genuine Perkins OE fuel filter for servicing your Perkins 4.108 engine. This filter was fitted to the earlier versions of the 4.108 engine. UK, ...

Quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for the factory marinised version of Perkins 4.108 fitted with the b...

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.108 fitted with electrically operated stop solenoid that screws...

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Opt...

Quality aftermarket 4.108 'breather hose' kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory mari...

A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Prod...

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.108 engines. These standard bel...

Quality aftermarket starter solenoids from Prestolite suitable for Perkins 4.108 inertia type starter motors fitted to automotive' or a marine engi...

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. These drain taps have t...

We can now offer an upgraded exhaust elbow connector for Perkins 4.108 marine engines. With time the original cast iron part will fail due to corro...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108. This is a high quality original equipment part as supplied by ...

Perkins 4.108 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK, European and Worldwide shipping available.

High quality aftermarket Perkins 4.108 Jabsco raw water pump drive shaft coupling UK, European and Worldwide shipping available.

We are now pleased to offer a Perkins 4.108 Exhaust outlet elbow kit, manufactured from 316 Stainless steel. This is a superbly engineered aftermar...

Quality aftermarket Perkins 4.108 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impell...

A set of five quality aftermarket raw water pump cover plate gaskets. Outside diameter 76mm Equivalent to Pekins part number 0490785 Equiv...

Perkins 4.108 Raw water pump alignment tool, used to center the adaptor plate to ensure reduced wear on the drive shaft components as specified in ...

Quality aftermarket Perkins 4.108 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide delivery available.

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare se...

Aftermarket Perkins 4.108 Temperature sender adapter; thread size 1/2" to 3/8"NPT UK, European and Worldwide shipping available

Lloyds Approved Nautilus Marine Exhaust Hose. This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced...

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details...

High quality aftermarket Perkins 4.108 coolant inlet connector. This is the short tube that is pressed into the block just below the alternator pos...

Quality aftermarket Perkins 4.108 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these...

A quality aftermarket aluminium thermostat housing to fit Perkins 4.108 marine engines. Kit includes: Thermostat housing Housing gasket Free 5ml H...

High quality aftermarket Perkins 4.108 raw water pump mounting gaskets, to fit a 'Jabsco' raw water Pump Kit contains: x1 Pump to mounting plate g...