Perkins 4.107 / 4.108 / 4.99 Engine Parts

A comprehensive aftermarket kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4.107M marine and...

A quality aftermarket set of main bearings fit to all versions of the Perkins 4.108 engine Available in the following sizes: Standard -0.010" -0.0...

Aftermarket Low oil pressure alarm for Perkins 4.108 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

12V 33RA 60A 4 Pin Split Charge Relay – Aftermarket This 12 volt split charge relay is a quality aftermarket alternative to the original Lucas unit...

Perkins 4.107 diesel lift pump - there are two types of lift pump used on these engines. 1. The 'two bolt' lift pump fits Perkins 4.107 early engi...

JB Marine Weld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar ...

Perkins 4.108 Raw water pump alignment tool, used to centre the adaptor plate to ensure reduced wear on the drive shaft components as specified in ...

Delphi fuel filter assembly Drain Plug and sealing washer. Thread diameter 7.5mm UK, European and worldwide shipping is available.

A genuine Perkins 4.108 fuel filter element - OE Part Number 30242. Paper element fuel filter for filter bowl type housings, fitted to early Perkin...

Quality aftermarket Perkins 4.108 exhaust elbow hose connector kit. Included are all the parts required to connect the Bowman heat exchanger end ca...

Aftermarket Perkins 4.108 tab washer kit, includes: x1 Flywheel locking tab washer - prevents the flywheel to crank bolts from working loose. x1 I...

Perkins 4.107 pre-combustion chamber insert These are quality Perkins genuine OE parts and are suitable for all Perkins 4.107 engines. Part No. 3...

Quality aftermarket 12 volt 65+ amp, 'high output' alternators fit all versions (including marine) of Perkins 4.108 engines set up for a 'three lug...

Genuine Perkins 4.108 Cylinder head studs - Part No. 32524138  Details: Length 105mm Ø 11mm Please note these studs are not suitable for 4.99 or 4...

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.107. These standard belts are p...

High quality aftermarket Perkins 4.107 Water pumps manufactured specifically for us. They are available with either the standard pulley for a 12 mm...

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aluminium aftermarket alternative, available in two versions, straight and 45 degre...

Genuine Perkins 4.108 Injector pipes to fit engines with a mechanically governed injector pump. (See photos to view a mechanically governed pump) ...

A genuine Perkins 4.107 fuel filter element - OE Part Number 30242. Paper element fuel filter for filter bowl type housings, fitted to early Perkin...

Perkins 4.108 pre-combustion chamber insert These are quality Perkins genuine OE parts and are suitable for all Perkins 4.108 engines. Part No. 3...

High quality aftermarket, Perkins 4.107 Exhaust Outlet Gasket. UK, European and Worldwide shipping available.

A very comprehensive set of quality aftermarket gaskets and seals for the bottom end of your Perkins 4.107, including marine versions. water pump ...

A pair of aftermarket Perkins 4.107 exhaust manifold gaskets - equivalent to 36862232. These are suitable for all versions of this engine and fit b...

High quality aftermarket Perkins 4.108 Jabsco raw water pump drive shaft coupling UK, European and Worldwide shipping available.

Good quality aftermarket water temperature sender that fits the majority of early Perkins 4.107 engines. Details: Spade type electrical connection...

Lloyds Approved Nautilus Marine Exhaust Hose. This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced ...

Genuine Perkins exhaust manifold studs in a set of 4 to fit Perkins 4.107 engines Total length = 50mm Stud protrudes 37mm form cylinder head face ...

A genuine Perkins 4.108 oil pressure relief valve kit. It includes the following items: Plunger Spring Spring cap Cotter pin UK, European and Wor...

High quality aftermarket 12 volt 90 amp high output alternators fit all versions Perkins 4.108 (including marine) of these engines set up for a 'th...

Quality aftermarket Perkins 4.108 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide delivery available.

A genuine Perkins Push Rod - OE Part No. 31434306. Fits 4.107, 4.108 and 4.99. UK, European and Worldwide Shipping.

A replacement aftermarket fuel line kit for your Perkins 4-107 with copper pipes cut over sized and supplied with a pipe cutter so you can achieve ...

Aftermarket Rear crankshaft Repair kit, the 'Achilles heel' of Perkins 4.107 design is the crankshaft rear rope seal which is notorious for leaking...

Aftermarket Perkins 4.107 header tank caps, with the correct pressure. Suitable for a combined header tank/heat exchanger located at the front of t...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108 - Bowman Part No. 2486H005 This is a high quality original equi...

High quality aftermarket Perkins 4.108 Oil filler caps available in two sizes: 62mm (external diameter) for marinized engine versions 45mm (extern...