Perkins 4.154 & 200 Series Engine Parts

A comprehensive aftermarket kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4154 engine. Thi...

A very comprehensive set of quality aftermarket gaskets and seals for the top end of your Perkins 4.154. The set includes: Cylinder head gasket ...

A very comprehensive set of quality aftermarket gaskets and seals for the bottom end of your Perkins 4.154The set includes Timing cover inner an...

A high quality aftermarket piston ring kit for your Perkins 4.154 engine. To fit the 5 ring pistons used on all UK and US versions of these engines...

Perkins 4.154 main bearing set. No longer available from Perkins and manufactured by Parts4engines to OE specification. These bearings are high qua...

High quality aftermarket connecting rod (big-end) bearings with sintered aluminium bearing faces. They fit all versions of the Perkins 4.154 engine...

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare se...

A quality aftermarket fuel lift pump for Perkins 4.154 engines, including marine versions. These pumps are very well engineered and excellent value...

High quality alternator belt which are the correct fitment for standard engines Perkins 4.154. These standard belts are produced by 'Gates', the le...

Quality aftermarket Perkins 4.154 series thermostat, details: 82°C thermostat opening temperature. Main diameter 54 mm, Thermostat includes jiggle...

Aftermarket Perkins 4.154 standard impeller kits to fit Jabsco 11850-0711 and 11850-0701 raw water pumps. Impeller diameter 57mm Shaft diameter 16...

Quality aftermarket Perkins 4.154 exhaust outlet gasket as used on the marine versions. UK, European and Worldwide delivery available.

A comprehensive set of quality aftermarket gaskets and seals for the top end of your Perkins 200 series. The set includes: Cylinder head gasket...

High quality aftermarket rocker cover gasket and seals set that will stop your cover leaking oil and fits all Perkins 4.154 UK/US versions of this ...

A quality aftermarket water pump for the Perkins 4.154 engine. Specification: Bolt hole spacing 47mm (see dimensional drawings in photos above)...

A pair of good quality aftermarket end caps for the later versions of the Perkins 4.154 marine engine fitted with Bowman type heat exchanger. These...

A quality aftermarket Perkins 4.154 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impe...

An aftermarket Perkins 4.154 200 series raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the ...

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.154 fitted with electrically operated stop solenoid that screws...

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 200 Series fitted with electrically operated stop solenoid that s...

High quality aftermarket engine mounts for Perkins 4.154 marine engines. Fitting the correct type of mount for the weight and use of your engine is...

Rear crankshaft upgrade kit for Perkins 4.154. The 'Achilles heel' of these engine designs is the crankshaft rear rope seal, which is notorious for...

A good quality aftermarket Perkins 4.154 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type elec...

A comprehensive set of quality aftermarket gaskets and seals to overhaul your Perkins 4.154 CAV DPA fuel pump. We stock both options for either the...

A quality aftermarket coolant drain tap for the Perkins 4.154 engine. Fully machined from solid brass. These drain taps have tapered threads and f...

Our standard aftermarket single spade oil pressure switch fits Perkins 4.154 that take an earth supply from the engine block. It has a tapered scre...

An aftermarket water temperature sender that fits early Perkins 4.154 engines. Spade type electrical connection for 12v or 24v systems. Supplied wi...

Replacement Perkins fuel filter assembly for Perkins Perkins 4.154 engines. This genuine Delphi quality part has the correct 1/2" UNF thread origin...

Perkins 4.154 sump bolt. This aftermarket part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. Diameter across...

A set of four excellent injector nozzles for Perkins 4.154 engines that have the correct type of tip for all marine and automotive versions of this...

An aftermarket starter/ignition switch for Perkins 4.154 engines. We offer two switch options, which have either 4 pin or 6 pin electrical connecti...

Quality aftermarket 12 Volt 65+ Amp, 'high output' alternators fit all versions (including marine) of Perkins 4.154 engines set up for a 'three lug...

Top quality aftermarket starter solenoids suitable for automotive and marine applications. Our automotive version is suitable for applications wher...

Fuel washers and seal kit for Perkins 4.154 engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washers x6 Fuel filte...

Fuel washers and seal kit for Perkins 4.154 200 Series engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washers x6 ...

Top quality aftermarket starter solenoids suitable for automotive and marine applications. Our automotive version is suitable for applications wher...

A high quality aftermarket pre-filter / water separator / fuel filter for Perkins 4.154 engines with re-usable internal gauze strainer and glass bo...

A high quality pre-filter / water separator / fuel filter for Perkins 200 series with re-usable internal gauze strainer and glass bowl. This univer...

Low oil pressure alarm for the Perkins 4.154 engine is a simple bulkhead mounted warning alarm, to be used in conjunction with an oil pressure swit...

Low oil pressure alarm for Perkins 200 series is a simple bulkhead mounted warning alarm, to be used in conjunction with an oil pressure switch. Id...

Quality aftermarket 12v Perkins 4.154 alternator, fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator...

Quality aftermarket Perkins 4.154 (200 series) alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounte...

A quality aftermarket water pump for Perkins 4.154 engines. Specification: Bolt hole spacing 47mm (see dimensional drawings in photos above) I...

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overh...

Perkins 4.154 injector (Refurbishment). These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We...

High quality aftermarket connecting rod (big-end) bearings with sintered aluminium bearing faces. Fits all versions of the Perkins 4.154 (200 serie...

Quality aftermarket Perkins 4.154 (200 series) main bearing set. No longer available from Perkins and manufactured by Parts4engines to the OE speci...

Quality aftermarket Perkins 4.154 oil filler cap. There are two sizes of filler cap used on Perkins 4.154 engines. The larger cap fits factory mari...