Perkins 6.354 Series Engine Parts

A quality aftermarket heavy duty zinc shaft anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppl...

Exopro classic engine Mineral oil SAE 20W-50. An oil suitable for both petrol and diesel engines. Details: Hi zinc content for ultimate protection...

A set of aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 6.354 We stock the mechanically governed version of this ...

Quality aftermarket 'standard impeller kits for factory marinised versions Perkins 6.354 engine. Please choose from the following Options: Optio...

Quality aftermarket Perkins 6.354 and 6.3544 'standard impeller and service kits' for the following engine types fitted with a Jabsco 9990-41 engin...

Aftermarket Perkins T6.3544 and HT6.3544 Piston ring set, details: Top ring 3mm, chrome faced Middle ring 2.3mm, cast Oil scraper ring 4.7mm...

Aftermarket Perkins 6.354 raw water pump end cover kit suitable for the Jabsco 9990-41 Pump The end covers on these pumps tend to wear, resulting i...

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synth...

A Perkins 6.354 Crankshaft rear oil seal replacement kit. (Early type rope seal) Kit Includes A pair of braided seals A quality rear seal hous...

Upgraded aftermarket Nitrile Perkins 6.354 Rocker cover gasket. Our upgraded gasket has been specially manufactured for Parts4engines from 100...

Aftermarket Perkins 6.354 Thermostat 70 mm (early version). Opening temperature is 78 deg. Will fit engine codes TC, TE, and TJ TC - 6.354 TE - T6...

A quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 6.354. These heat resistant plastic adapters are designed ...

Genuine OE alternator belts which are the correct fitments for Perkins 6.354 engines. *Please note that there are different belt lengths on these ...

Quality aftermarket Perkins 6.354 12v Fuel heater (thermostart). Available with either 'spade' or 'screw' type electrical connections. A burnt-out...

Quality aftermarket Perkins 6.354 Rear crankshaft oil lip seal. UK, European and Worldwide shipping available.

Perkins 6.354 series Thermostat fits engines with codes beginning: TG, TH, TJ, TP, TR, TT, TU, TV, TW, TX. 82°C thermostat to open. Main diameter 5...

A set of replacement heat exchanger and oil cooler seals for Perkins 6.354 engine with Serk 320903 exchanger. These are high quality nitrile rubber...

Quality aftermarket single spade oil pressure switch fits Perkins 6.354 that take an earth supply from the engine block. It has a tapered screw thr...

High quality aftermarket Perkins 6.354 Oil Filler cap. There are two sizes of filler cap used on Perkins 6.354. The larger cap fits factory marini...

JB Marine Weld is a specially formulated two-part steel reinforced epoxy cold weld system that provides for strong, lasting repairs for bonding dif...

JB MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar s...

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overh...

Aftermarket made in England from high quality components, comprising zinc plated steel caps, stainless steel springs and brass internals. Perkins ...

We have good quality aftermarket pushrods available for Perkins 6.354. They have correctly hardened ends and fit all versions of these engines. It...

A genuine OE Perkins 6.354 Injector pump drive shaft bush to fit the type of drive shaft 31.7 mm (1.25'') Suitable for the following engine series...

Fuel washers and seal kit for Perkins 6.354 series engines. Kit Includes: x6 Injector copper washers x12 Fuel return pipe washers x6 Fu...

A quality genuine Perkins OE oil filter to fit the majority of Perkins 6.354 variants, including the HT6.354 version. Filter with height of 13 cm ...

AftermarketLow Oil Pressure Alarm for Perkins 6.354 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure swi...

Standard aftermarket cork Perkins 6.354 Rocker cover gasket. UK, European and Worldwide shipping available.

Aftermarket Delphi blanking plug kit for Filter Assembly includes: x2 Blanking plugs (1/2"UNF thread) x2 Blanking plug copper washers x1 Air v...

A set of 4 aftermarket Perkins 6.354 Crankshaft thrust washers (Standard size) UK, European and Worldwide shipping available.

Quality aftermarket Perkins 6.354 front crankshaft / timing cover oil seal. UK, European and Worldwide shipping available.

High quality aftermarket fuel banjo bolt set, includes: x4 Banjo bolts UK, European and Worldwide shipping available.

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare se...

Delphi fuel filter assembly Drain Plug and sealing washer. Thread diameter 7.5mm UK, European and worldwide shipping is available.

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Opt...

UNF A2 Stainless steel nuts, ideal for use in the marine environment, details: UNF (Unified National Fine) 1/4 = 7/16 AF spanner size 5/16 =...