Perkins 4.107 / 4.108 / 4.99 Engine Parts

Quality aftermarket Perkins 4.99 Jabsco raw water pump drive. This part is only suitable for Jabsco raw water Pump UK, European and Worldwide shipp...

A quality aftermarket aluminium thermostat housing kit for Perkins 4.99 marine engines. Kit includes: Thermostat housing Housing gasket Hylomar se...

A genuine Perkins 4.99 cam follower. UK, European and Worldwide shipping available.

Quality aftermarket Perkins 4.99 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator. ...

Genuine Bowman 3366 oil cooler end covers for Perkins 4.99 engines. Dimensions are: Internal hole size 52mm and 28mm length 55mm UK, European and...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.99, supplied with a high temperature switch. Ideal for marine use, as it gives a...

We have a number of used but in very good condition Perkins 4.99 OE camshafts. These camshafts are no longer available for Perkins. UK, European an...

Aftermarket Perkins 4.99 Temperature sender adapter; thread size 1/2" to 3/8"NPT. UK, European and Worldwide shipping available.

Perkins 4.99 Raw water pump alignment tool, used to centralise the adaptor plate to ensure reduced wear on the drive shaft components and as specif...

Genuine Perkins 4.99 injector flange / clamp. Can be simply replaced if broken by removing the injector nozzle. UK, European and Worldwide shipping...

12v electrically operated temperature gauge and sender for Perkins 4.99. This is a quality aftermarket waterproof gauge, ideal for use in the marin...

A rare find! We have a small number of good, used Perkins 4.99 connecting rod available. Small end bushes are serviceable with no apparent wear.The...

Quality aftermarket Perkins 4.99 Core Plug set, details: Set of 9 Anodised mild steel core plugs x6  1 1/4" x1  1" x2  7/8" UK, European and Worl...

Quality aftermarket Exhaust elbow Outlet Gasket for Perkins 4.99 marine engines. Available for 4 or 5 hole outlets. UK, European and Worldwide ship...

A quality aftermarket Perkins 4.99 water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimenter is...

A Perkins 4.99 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details:...

Combined Bowman exhaust manifold and heat exchanger that fits Perkins 4.99. This is a high quality original equipment part as supplied by Perkins i...

Quality aftermarket starter solenoids from Prestolite suitable for Perkins 4.99 inertia type starter motors fitted to automotive' or a marine engin...

Aftermarket Perkins 4.99 Water pumps manufactured specifically for us and to our high quality requirements. They are available with either the stan...

Aftermarket starter/ignition switch for Perkins 4.99 engines, we offer two switch options, which have either 4 pin or 6 pin electrical connections ...

Excellent quality aftermarket alternator and water pump drive belts which are the correct fitment for standard Perkins 4.99 engines. These standard...

Genuine Jabsco bronze sea water pump as fitted to all Perkins 'UK factory marinised' versions of the Perkins 4.99 engine. The pump is engine driven...

We are pleased to offer fully reconditioned Perkins 4.99 DPA pumps. These are disassembled, completely cleaned, inspected and all worn parts are re...

High quality aftermarket Replacement 'standard impeller kits' and 'raw water pump service kits' for the factory marinised version of Perkins 4.99 f...

Perkins 4.99 Oil Filter Conversion kit. If you have one of the early marine versions of these engines with the paper oil filters inside a re-usabl...

Aftermarket Perkins 4.99 sump bolt. This part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. Diameter across ...

Replacement Perkins fuel filter assembly for Perkins 4.99engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitting...

A set of quality aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.99. We stock both options for either the mechan...

A comprehensive aftermarket rear crankshaft oil seal upgrade kit for Perkins 4.99 engines. The 'Achilles heel' of these engine designs is the crank...

High quality SI-ACR Blue Water 12 or 24v automatic battery charging relay designed in the USA. Automatically combines batteries during charging, is...

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth c...

We have recently sourced a limited number of new (old stock) Perkins 4.99 & 4.107 mechanically governed injector pumps. These pumps have been i...

A genuine OE Perkins oil pressure relief valve kit. It includes the following items: Plunger Spring Cotter pin Suitable for Perkins 4.99, 4.107, 4...

Quality aftermarket Perkins 4.107 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide delivery available.

We can now offer an high quality upgraded aftermarket exhaust elbow connector for Perkins 4.107 kit for marine engines. Manufactured from 316 Sta...

Reconditioned Perkins 4.107 injector. These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We al...

Lucas Extreme Duty Marine ATF is a blend of synthetic base oils and a special additive package designed to create a high friction fluid that allows...

We are pleased to offer fully reconditioned Perkins 4.107 DPA injector pump. The pumps are disassembled, completely cleaned, inspected and all worn...

Perkins 4.107 drive gears, USED but in excellent condition. These were removed from (low hour use ) Ex-MOD auxiliary generators.The options include...

We have a number of used but in very good condition Perkins 4.107 OE camshafts. These camshafts are no longer available for Perkins. UK, European a...

A genuine Perkins 4.108 cam follower to fit all 4.108 engines. UK, European and Worldwide shipping available.

A genuine Perkins 4.107 cam follower UK, European and Worldwide shipping available.

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108M early and later 'lowline' version. These are high quality nitrile rubbe...

Aftermarket 12v electrically operated temperature gauge and sender for Perkins 4.107. This is a quality waterproof gauge, ideal for use in the mari...

Reconditioned Perkins 4.107 injector. These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We al...

Reconditioned (low hours) Perkins 4108 basic engine block with crank and pistons. Originally used by the MOD as generator engines, which we fully s...

A set of replacement heat exchanger and (oil cooler lowline only) O seals. The early 4.99 4.107 & 4.108 kit comprises 4 Nitrile BS343 70S heat ...

We are pleased to offer fully reconditioned Perkins 4.107 injector pump. These pumps are disassembled, completely cleaned, inspected and all worn p...