New Arrivals

Genuine Perkins OE Fuel filter for the Perkins 100 Series range of engines 'Spin-on' filter (diameter 78 mm) to fit: KB - 103-06 KC - 103-09 KD - ...

Volvo Penta MD2030 Piston ring set. includes: x3 Top ring - chrome faced 2 mm x3 2nd ring - chrome faced 1.5 mm x3 3rd ring - spring loaded vanadi...

A top quality aftermarket Volvo Penta MD22 timing belt kit which is the correct fitment for all versions of this engine, including marine. These ar...

Volvo Penta MD22 Crankshaft (used) UK, European and Worldwide shipping available.

A pair of aftermarket Heat exchanger End Covers to fit all versions of the Volvo Penta MD22 engine. These are the 'rubber boot' end covers that fit...

Top quality aftermarket Volvo Penta TAMD22 alternator belt which is the correct fitment for standard engines. These standard belts are produced by ...

The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes...

A set of four quality aftermarket glowplugs to fit Volvo Penta MD22 engine. Easy to change and a great help to cold starting! UK, European and Worl...

Volvo Penta MD22 water pump. This is a high quality pump manufactured solely for Parts4engines and represents an improvement in quality and cost w...

High quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for Perkins Perama M25 fitted with the bronze engine driven raw...

Perkins 100 Series Perama M30 KD build 103.10. Reconditioned Engine with new heat exchanger. UK delivery is by Courier. European and Worldwide shi...

A quality aftermarket Perkins Phaser 1006T Oil Pump, suitable for the following engine build codes: YA - 1006-6 YB - 1006-6T YC - 1006-6T YD - 100...

Aftermarket Perkins 4.107 header tank cap, to fit a combined header tank/heat exchanger at the front of the engine, fitted with a 60 mm diameter wi...

A very comprehensive set of very high quality aftermarket gaskets and seals Perkins Perama M30 marine engines, build code KD, 103-10. The set inclu...

Perkins 400 Series main bearings. UK, European and Worldwide shipping available.

Perkins 400 series rear Crankshaft Oil seal will fit engine codes GN,GP,GR,GS,HM,HO,HP,HR. UK, European and Worldwide shipping available.

A comprehensive set of quality aftermarket gaskets and seals for your Perkins 400 Series engine. This set is designed for the 404C-22 engine, whic...

We stock the full range of water pumps for Perkins 400 Series. See below for which pump type fits your engine version. A well engineered and exc...

We stock the full range of water pumps for these Perkins 100 series engines. See below for which pump type fits your engine version. For engine ty...

High quality alternator belt which are the correct fitment for standard engines Perkins 4.154. These standard belts are produced by 'Gates', the le...

Perkins 4.236M Heat exchanger end plate and gasket. This will fit the early version only. Original part number 37482171 UK, European and Worldwide ...

Top quality alternator belts which are the correct fitment for standard engines Perkins Prima M80T. These standard belts are produced by 'Gates', t...

A high quality fuel lift pump for the Perkins Perama M35 engine. We offer 2 types of diesel lift pump for this engine, industrial and the marine ve...

Perkins 4.236 aftermarket core plug set. Set includes the following core plugs: 1 1/2 Inch x3 1 3/8 Inch x4 1 1/4 Inch x9 UK, European and ...

A quality aftermarket replacement fuel lift pump for the Perkins Phaser 1004 engine, including marine versions. These pumps are very well engineere...

A quality aftermarket fuel lift pump for Perkins Phaser 1006 engines, including marine versions. These pumps are very well engineered and excellent...

Reconditioned Perkins 4.108 injector. These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We al...

Aftermarket Perkins 6.354 Thermostat 70 mm (early version). Opening temperature is 78 deg. Will fit engine codes TC, TE, and TJ TC - 6.354 TE - T6...

Genuine Perkins 4.108 connecting rod. Complete with fitted small end bush. UK, European and Worldwide shipping available.

Perkins Prima core plug set. UK, European and Worldwide shipping available.

Perkins 4.99 drive gears, USED but in excellent condition. These were removed from (low hour use ) Ex-MOD auxiliary generators. The options include...

A comprehensive aftermarket Overhaul Kit for Perkins Phaser 1004 Engine which includes the major components that you will need to overhaul your tir...

A very comprehensive aftermarket set of quality gaskets and seals for the top end of your Perkins Phaser 1006 engine, set includes: Cylinder head ...

A comprehensive aftermarket overhaul kit which includes the major components that you will need to overhaul your tired and smoking Perkins 1006 eng...

A very comprehensive set of quality aftermarket gaskets for the bottom end of your Perkins phaser 1006 engine. Please select the option buttom to a...

A set of 8 aftermarket Perkins 4.248 Connecting rod bolts & nuts, set contains: 8 Bolts 8 Nuts UK, European and Worldwide delivery avai...

Perkins 1100 Series aftermarket Head gasket set manufactured in the UK using the highest quality gasketing materials.Set includes the following ite...

A genuine OE Perkins 1104 and 1103 series oil filter (filter height 17cm) for engine codes: NH - 1104D-E44T NJ - 1104D-E44TA NK - 1104D-44 NL - 11...

This genuine OE Oil Filter fits Perkins Phaser 1006 series. We supply two options to fit these engines with heights of either 13 cm or 17 cm. Both ...

Genuine OE Perkins Phaser 1004 series oil filter available in two different lengths : 13 cm or 17 cm UK, European and Worldwide shipping available.

A quality genuine Perkins OE oil filter to fit the majority of Perkins 6.354 variants, including the HT6.354 version. Filter with height of 13 cm ...

A high quality aftermarket Perkins 1104 electric fuel pump for Perkins 1104 range, Perkins part number 4132A018 To fit the following engine build c...

This quality set of aftermarket main bearings fits all versions of the 1004 engine. They can be supplied as standard, 0.010", 0.020" or 0.030" unde...

Perkins 4.203 aftermarket crankshaft representing excellent value. Details: This crankshaft is suitable for used with a rear rope seal and canno...

Perkins 4.236 aftermarket camshaft, a quality replacement part which is correctly hardened, this camshaft represents excellent value. We can suppl...

A set of quality aftermarket thrust washers to fit all versions of these engine Perkins Phaser 1006. Please note that they are standard size. UK, E...

Quality aftermarket Perkins 4.248 Cam Followers (Valve Tapet) ideally replaced in a set. Fits versions: LF - 4.248 UK, European and Worldwide shi...

A set of replacement heat exchanger and (oil cooler lowline only) O seals. The early 4.99 4.107 & 4.108 kit comprises 4 Nitrile BS343 70S heat ...