Products

Aftermarket Low oil pressure alarm for Perkins 4.236 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

Aftermarket pair of end caps for the later versions of the Perkins 4.236 M marine engine fitted with 'Bowman' type heat exchanger. These are the 'r...

This quality set of aftermarket main bearings fits all versions of the Perkins 4.236 engine. Available options are: Standard, 0.010" 0.020" 0...

A set of genuine OE Perkins lubricating oil and fuel filters for servicing your Perkins 4.236 engine. The set comes with seals and 'O' ring for the...

High quality aftermarket Perkins 4.236 Oil Filler cap. There are three sizes of oil filler cap used on Perkins 4.236. The larger cap fits factory ...

A genuine OE Perkins 4.236 oil filter for servicing your Perkins 4.236 and (4.236M marine) engine. UK, European and Worldwide shipping available.

If you have one of the early marine versions of these engines with the paper oil filters inside a re-usable steel housing, then you will know what ...

A genuine OE Perkins 4.236 oil pressure relief valve kit. It includes the following items: Plunger Spring Spring cap Cotter pin It fits to engine...

Quality aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.236 with 2 options available: Earth return sender - uses the oute...

Standard aftermarket oil pressure switch for Perkins 4.236 engines. Details: Earth return, (takes an earth supply from the engine block) Tapere...

Aftermarket Perkins 4.236 Oil Pump naturally aspirated. These pumps are very well engineered and offer excellent value. To fit the following engin...

A quality aftermarket set of piston rings for your Perkins 4.236. These ring sets fit all 5 ring pistons used on most versions of this engine. Y...

We have good quality aftermarket pushrods available for Perkins 4.236. They have correctly hardened ends and fit all versions of these engines. It...

Genuine Jabsco Perkins M4.236 Raw Water Pump Perkins fitted two types of raw water pump on 4.236 / M90 engines. We stock both types and they are hi...

Aftermarket Perkins 4.236 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lowe...

Aftermarket Perkins 4.236 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide shipping available.

Replacement quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for all factory marinised versions Perkins 4.236 fitted ...

A set of aftermarket rocker arms to fit all versions of the Perkins 4.236 engine. These are very well engineered aftermarket parts and offer excell...

Quality aftermarket Perkins 4.236 Rocker cover gaskets. The standard rocker cover gasket manufactured from cork.  Our upgraded rocker cover gasket...

Quality aftermarket rocker shaft to fit all Perkins 4.236 engines UK, European and worldwide shipping available.

A quality aftermarket rocker shaft assembly for your Perkins 4.236 engine. Suitable for the following engine codes: LD 4.236 LJ T4...

A quality aftermarket pre-filter / water separator / fuel filter for Perkins 4.236 with re-usable internal gauze strainer and glass bowl. This univ...

High quality Perkins 4.236 alternators 12V, earth and insulated returned, fit all versions (including marine) of these engines set up for a 'three ...

Quality aftermarket Perkins 4.236 starters 12V earth return, fitted on all versions (including marine). Set up for a 'three lug' mounted starter. C...

A set of four injector nozzles for Perkins 4.236. The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively...

Quality aftermarket Perkins 4.236 starter ring gear, details: Number of teeth 115 Outside diameter 368mm Inside diameter 340mm Width 17.5mm  UK, ...

Quality aftermarket Perkins 4.236 starter ring gear, details: Number of teeth 126 Outside diameter 404mm Inside diameter 375mm Width 17.5mm  UK, ...

Quality aftermarket replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.236 fitted with electrically operated stop ...

Aftermarket Perkins 4.236 sump bolt. This part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. Details: Dia...

Aftermarket Perkins 4.236 Temperature sender adapter; thread size 1/2" to 3/8"NPT UK, European and Worldwide shipping available.

Quality aftermarket Perkins 4.236 Early Version Thermostat. Opening temperature is 78°C. Main diameter 2.75 inches (70 mm), includes jiggle pin and...

A set of 4 aftermarket Perkins 4.236 Crankshaft Thrust washers (Standard size) UK, European and Worldwide shipping available.

A very comprehensive set of aftermarket quality gaskets and seals for the top end of your Perkins 4.236. Cylinder head gasket - top quality and ...

This quality aftermarket water pump (no pulley included) fits the turbo versions of the Perkins 4.236. (Pully shaft diameter is 19mm, Parallel with...

A comprehensive, aftermarket overhaul kit which includes the major components that you will need to overhaul your tired Perkins 4.236 cylinder head...

Quality aftermarket water pump for Perkins 4.236 engines including all marinised versions. Comes with: Pulley Pump gasket 5ml Hylomar sealant (wit...

Perkins 4.236 Water pump for a small number of late, normally aspirated 4.236 engines. Please note that there are two water pump options for the no...

Aftermarket Water Temperature Sender that fits early Perkins 4.236 engines. Details: Single electrical connection for (Earth return) Twin electric...

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth c...

High quality aftermarket engine mounts for Perkins 4.236M marine engines. Fitting the correct type of mount for the weight and use of your engine i...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.236M early version. These are high quality nitrile rubber seals, manufacture...

Perkins 4.236M Heat exchanger end plate and gasket. This will fit the early version only. Original part number 37482171 UK, European and Worldwide ...

Perkins 4.236 aftermarket Oil Pump turbo charged. These oil pumps are very well engineered and offer excellent value. It fits the following engine...

These 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.248 engines set up for a 'three lug' mounted alternator. The adj...

Genuine OE Perkins alternator belts which are the correct fitment for Perkins 4.248 engines. *Please note that there are different belt lengths on ...

A very comprehensive set of high quality aftermarket gaskets and seals for the bottom end of your Perkins 4.248. Manufactured in the UK from the hi...

Quality aftermarket Perkins 4.248 Cam Followers (Valve Tapet) ideally replaced in a set. Fits versions: LF - 4.248 UK, European and Worldwide shi...