Perkins 4.236 Engine Parts

Replacement Perkins fuel filter assembly for Perkins 4.236 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

Aftermarket Delphi blanking plug kit for Filter Assembly includes: x2 Blanking plugs (1/2"UNF thread) x2 Blanking plug copper washers x1 Air v...

We are pleased to offer fully reconditioned Perkins 4.236 & M90 injector pump repair service. Pumps are disassembled, completely cleaned, inspe...

Delphi fuel filter assembly Drain Plug and sealing washer. Thread diameter 7.5mm UK, European and worldwide shipping is available.

Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel. Details: Add to the...

A set of quality aftermarket gaskets and seals to overhaul your Perkins 4.236 CAV DPA fuel pump. We stock both options for either the mechanically ...

A set of four injector nozzles for Perkins 4.236. The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively...

Quality aftermarket Perkins 4.236 Early Version Thermostat. Opening temperature is 78°C. Main diameter 2.75 inches (70 mm), includes jiggle pin and...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.236M early version. These are high quality nitrile rubber seals, manufacture...

Quality aftermarket replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.236 fitted with electrically operated stop ...

Genuine Jabsco Perkins M4.236 Raw Water Pump Perkins fitted two types of raw water pump on 4.236 / M90 engines. We stock both types and they are hi...

Replacement quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for all factory marinised versions Perkins 4.236 fitted ...

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare se...

Aftermarket Water Temperature Sender that fits early Perkins 4.236 engines. Details: Single electrical connection for (Earth return) Twin electric...

Standard aftermarket oil pressure switch for Perkins 4.236 engines. Details: Earth return, (takes an earth supply from the engine block) Tapere...

A set of quality aftermarket replacement heat exchanger and oil cooler seals for Perkins 4.236 later 'lowline'. These are high quality nitrile rubb...

Aftermarket Perkins 4.236 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lowe...

Quality aftermarket Coolant drain tap for this Perkins 4.236 engine. This is a quality part and is fully machined from solid brass. These drain ta...

Aftermarket Perkins 4.236 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide shipping available.

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overh...

Quality aftermarket water pump for Perkins 4.236 engines including all marinised versions. Comes with: Pulley Pump gasket 5ml Hylomar sealant (wit...

This quality aftermarket water pump (no pulley included) fits the turbo versions of the Perkins 4.236. (Pully shaft diameter is 19mm, Parallel with...

Perkins 4.236 Water pump for a small number of late, normally aspirated 4.236 engines. Please note that there are two water pump options for the no...

Aftermarket Perkins 4.236 Temperature sender adapter; thread size 1/2" to 3/8"NPT UK, European and Worldwide shipping available.

Standard ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engin...

A Lucas heavy duty relay with detachable mounting bracket. These high quality waterproof relays were extensively used on Perkins marine wiring loom...

An aftermarket starter/ignition switch for Perkins 4.236 engines, we offer two switch options, which have either 4 pin or 6 pin electrical connecti...

High performance electrical relay with mounting bracket suitable for high current switching. Details: 12v 100 amp Dimensions 4.5cm x 4.5cm x 7cm C...

Aftermarket Low oil pressure alarm for Perkins 4.236 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth c...

Quality aftermarket12v heater plug (thermostart) for Perkins 4.236. It can be supplied with either the 'spade' or alternative 'screw' type electric...

Quality aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.236 with 2 options available: Earth return sender - uses the oute...

Universal 12V to 24V waterproof Temperature gauge with sender. This high quality product has been manufactured solely for Parts4engines and is desi...

High quality aftermarket 90 Amp 'insulated earth' 12v alternators for the 4.236 and M90 marine engines. Manufactured by Prestolite Electric, US...

Quality aftermarket Perkins 4.236 starters 12V earth return, fitted on all versions (including marine). Set up for a 'three lug' mounted starter. C...

High quality Perkins 4.236 alternators 12V, earth and insulated returned, fit all versions (including marine) of these engines set up for a 'three ...

These quality aftermarket 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.236 engines set up for a 'three lug' mounted...

UK, European and Worldwide shipping available.

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synth...

A range of quality aftermarket enamel engine paints which are an accurate match for the original Perkins paints and are manufactured in the UK sole...

Liqui Molly Battery Clamp Grease. A Specially formulated grease that protects battery terminals and electrical contacts from corrosion and oxidatio...

Liqui Molly installation paste. A high-performance tungsten disulfide paste for heavy-duty applications. Adheres even to apparently smooth surfaces...

Liqui Molly Diesel Purge additive is designed to remove deposits on injection nozzles and combustion chambers as well as boosting the cetane number...

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Syn...

A set of quality mixed cable connectors ideal to keep in your boat or vehicle for an emergency, set includes: x1 Storage box. x12 Lucar connectors...

1 Litre tin of Paint Thinners ideal for use with Parts4engines engine enamel paint.  Manufactured in the UK  For more information please see the D...