Products

A quality aftermarket Perkins 4108 cylinder head gasket. Laminated gasket with additional silicon sealant around the water jacket areas. Fits a...

Genuine Perkins 4.108 Cylinder head studs, details: Length 105mm Ø 11mm Please note these studs are not suitable for 4.99 or 4.107 engines UK, Eu...

We are pleased to offer a Perkins 4.108 DPA injector pump repair service . The pumps are disassembled, completely cleaned, inspected and worn parts...

We are pleased to offer fully reconditioned Perkins 4.108 injector pump. These pumps are disassembled, completely cleaned, inspected and all worn p...

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. These drain taps have t...

Aftermarket Perkins 4.108 drip rail; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins ha...

A comprehensive aftermarket kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4108 engine This...

We can now offer an upgraded exhaust elbow connector for Perkins 4.108 marine engines. With time the original cast iron part will fail due to corro...

A pair of aftermarket Perkins 4.108 exhaust manifold gaskets. These are suitable for all versions of this engine. UK, European and Worldwide shippi...

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.108 engines. Total length = 50mm Stud protrudes 37mm measured form cylinder he...

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK, European and Worldwide shipping available.

Perkins 4.108 front crankshaft / timing cover oil seal, a quality aftermarket lip seal. UK, European and Worldwide shipping available.

A genuine Perkins OE fuel filter for servicing your Perkins 4.108 engine. This filter was fitted to the earlier versions of the 4.108 engine. UK, ...

A genuine Perkins 4.108 fuel filter. Includes: x1 Fuel filter x3 Sealing rings UK, European and Worldwide available.

Replacement Perkins fuel filter assembly for Perkins 4.108 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

Perkins 4.108 diesel lift pump Kit - there are two types of lift pump used on these engines. 1. The 'two bolt' lift pump fits Perkins 4.108 early e...

A high-quality replacement aftermarket fuel line kit for your Perkins 4.108 with soft copper pipes cut oversized and supplied with a pipe cutter so...

Aftermarket Perkins 4.108 high quality water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimente...

Perkins 4.108 fuel pump push rod, made in Sheffield for parts4engines. (No longer available from Perkins). Details Length 93mm Diameter 9.5mm UK,...

Fuel washers and seal kit for Perkins 4.108 Series engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washers x6 Fue...

A set of aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.108. We stock both options for either the mechanically ...

A quality aftermarket glowplug for Perkins 4.108 engines. Fits late type cylinder heads, where the glowplug is directly screwed into the cylinder ...

Quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 4.108. These heat resistant plastic adapters are designed to ...

Quality aftermarket Perkins 4.108 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type electrical ...

Perkins manufactured three marinised versions of Perkins 4.108 engines over the years, each with different options for the header tank used. See ph...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108 'lowline' engines. These are high quality nitrile rubber seals, manufact...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.108, supplied with a high temperature switch. Ideal for marine use, as it gives ...

Aftermarket starter/ignition switch for Perkins 4.108 engines, including marine versions. We offer two switch options, which have either 4 pin or 6...

Genuine Perkins 4.108 injector fixing studs. Details: x1 50mm long x1 40mm long UK, European and Worldwide shipping available.

Genuine Perkins 4.108 injector flange / clamp. Can be simply replaced if broken by removing the injector nozzle. UK, European and Worldwide shippin...

Genuine Perkins 4.108 Injector pipes to fit engines with a mechanically governed injector pump. (See photos to view a mechanically governed pump) ...

Genuine Perkins 4.108 Injector pipes to fit the lowline marine engine version, with the following build codes: ED13630, ED13631, ED22111, ED22714, ...

Aftermarket Perkins 4.108 Injector pump Anti stall valve for use on injector pumps with an Hydraulic Governor. Includes: Anti stall valve fixi...

A pair of genuine Perkins 4.108 Injector pump drive shaft bushes to fit the later type of drive shaft 31.7 mm (1.25'') UK, European and Worldwide s...

Perkins 4.108 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK, European and Worldwide shipping available.

High quality aftermarket Perkins 4.108 Jabsco raw water pump drive shaft coupling UK, European and Worldwide shipping available.

Quality aftermarket Perkins 4.108 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these...

Aftermarket Perkins 4.108 tab washer kit, includes: x1 Flywheel locking tab washer - prevents the flywheel to crank bolts from working loose. x...

Aftermarket Low oil pressure alarm for Perkins 4.108 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

High quality aftermarket This 12 volt Perkins alternator fits the Perkins 4.108 'lowline' marine engine. The adjuster arm securing bolt is at a 180...

Replacement aftermarket engine mounts for the version of the Perkins 4.108M Lowline marine engine that was fitted to an outdrive unit and 'hung' be...

A pair of (pencil style) Perkins 4.108 Lowline heat exchanger Anodes. This Anode is located inside a blanking plug (see photo). Quality product fr...

A quality aftermarket set of main bearings fit to all versions of the Perkins 4.108 engine. Available in the following sizes: Standard -0.010" -0....

High quality aftermarket Perkins 4.108 Oil filler caps available in two sizes: 62mm (external diameter) for marinised engine versions 45mm (extern...

A genuine Perkins 4.108 oil filter for servicing your Perkins 4.108 and (4.108M marine) engine. There are two types of filters used on these engin...

A genuine Perkins 4.108 oil filter for servicing your Perkins 4.108 and (4.108M marine) engine. There are two types of filters used on these engine...

Quality Perkins 4.108 Oil filter conversion kit. If you have one of the early marine versions of these engines with the paper oil filters inside a ...

Aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.108 with 2 options available: Earth return sender - uses the outer casing t...