Products

A very comprehensive set of aftermarket quality gaskets and seals for the top end of your Perkins 4.236. Cylinder head gasket - top quality and ...

This quality aftermarket water pump (no pulley included) fits the turbo versions of the Perkins 4.236. (Pully shaft diameter is 19mm, Parallel with...

A comprehensive, aftermarket overhaul kit which includes the major components that you will need to overhaul your tired Perkins 4.236 cylinder head...

Quality aftermarket water pump for Perkins 4.236 engines including all marinised versions. Comes with: Pulley Pump gasket 5ml Hylomar sealant (wit...

Perkins 4.236 Water pump for a small number of late, normally aspirated 4.236 engines. Please note that there are two water pump options for the no...

Aftermarket Water Temperature Sender that fits early Perkins 4.236 engines. Details: Single electrical connection for (Earth return) Twin electric...

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth c...

High quality aftermarket engine mounts for Perkins 4.236M marine engines. Fitting the correct type of mount for the weight and use of your engine i...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.236M early version. These are high quality nitrile rubber seals, manufacture...

Perkins 4.236M Heat exchanger end plate and gasket. This will fit the early version only. Original part number 37482171 UK, European and Worldwide ...

Perkins 4.236 aftermarket Oil Pump turbo charged. These oil pumps are very well engineered and offer excellent value. It fits the following engine...

These 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.248 engines set up for a 'three lug' mounted alternator. The adj...

Genuine OE Perkins alternator belts which are the correct fitment for Perkins 4.248 engines. *Please note that there are different belt lengths on ...

A very comprehensive set of high quality aftermarket gaskets and seals for the bottom end of your Perkins 4.248. Manufactured in the UK from the hi...

Quality aftermarket Perkins 4.248 Cam Followers (Valve Tapet) ideally replaced in a set. Fits versions: LF - 4.248 UK, European and Worldwide shi...

A quality set of aftermarket connecting bearings to fit all versions of the Perkins 4.248 engine. They can be supplied in the following sizes: S...

A set of 8 aftermarket Perkins 4.248 Connecting rod bolts & nuts, set contains: 8 Bolts 8 Nuts UK, European and Worldwide delivery avai...

Perkins 4.248 core plug set (aftermarket) Details: 1 1/2 Inch x3 1 3/8 Inch x4 1 1/4 Inch x9 UK, European and Worldwide delivery available.

We now have new quality aftermarket crankshafts available for Perkins LF - 4.248 engine These can be supplied in lightweight or heavyweight versio...

A high quality aftermarket part, this cylinder head (complete with valve train assembly) fits all naturally aspirated (non-turbo) versions of the ...

Perkins 4.248 quality aftermarket cylinder head bolt kit, specifications are: 140mm x2 120mm x12 103mm x8 Sizes (measur...

Quality aftermarket Perkins 4.248 fuel Lift Pump kit . We stock two and four bolt types for early and late engine versions. Kit includes gasket,...

Quality aftermarket Coolant drain tap for this Perkins 4.248 engine. This is a quality part and is fully machined from solid brass. These drain ta...

A very comprehensive aftermarket kit which includes the major components that you will need to overhaul your Perkins 4.248 engine. This overhaul k...

Perkins 4.248 front crankshaft / timing cover oil seal, a quality aftermarket lip seal. UK, European and Worldwide shipping available.

A genuine Perkins 4.248 fuel filter. Includes: x1 Fuel filter x3 Sealing rings UK, European and Worldwide available.

Replacement Perkins fuel filter assembly for Perkins 4.248 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

Aftermarket fuel washers and seal kit for Perkins 4.248 Series. UK, European and Worldwide shipping available.

A set of aftermarket gaskets and seals to overhaul your Perkins 4.248 CAV DPA fuel pump. We stock both options for either the mechanically or hydr...

Aftermarket Perkins 4.248 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type electrical connecti...

Aftermarket starter/ignition switch for Perkins 4.238 engines, including marine versions. We offer two switch options, which have either 4 pin or 6...

Aftermarket Injector leak-off rail that fits all versions of the Perkins 4.248. It has threaded outlets at both ends and is quality anodized produc...

High quality zinc plated aftermarket Perkins 4.248 injector pipes for mechanically governed pump only. These pipes will fit all types of 4.248 engi...

Aftermarket Low oil pressure alarm for Perkins 4.248 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

A quality aftermarket set of main bearings, fits all versions of the Perkins 4.248 engine. Size options are: standard -0.010" -0.020" -0.030...

A set of genuine OE Perkins lubricating oil and fuel filters for servicing your Perkins 4.248 engine. The set comes with seals and 'O' ring for the...

High quality aftermarket Perkins 4.248 Oil Filler cap. There are two sizes of oil filler cap used on Perkins 4.248. The larger 62 mm cap fits fact...

If you have one of the early marine versions of these engines with the paper oil filters inside a re-usable steel housing, then you will know what ...

Aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.248 with 2 options available: Earth return sender - uses the outer casing...

Standard aftermarket oil pressure switch for Perkins 4.248 engines. Details: Earth return, (takes an earth supply from the engine block) Tapere...

Quality aftermarket Perkins 4.248 Oil pump for naturally aspirated engines. Suitable for: LF - 4.248 LG - 4.2482 UK, European and worldwide ...

Quality aftermarket Perkins 4.248 pushrods, with correctly hardened ends to fit the following versions of these engines: LF - 4.248 LG - 4.248...

Quality aftermarket Perkins 4.248 Rear crankshaft oil seal. UK, European and Worldwide shipping available.

This set of quality aftermarket replacement rocker arms fits all versions of Perkins 4.248 engineThe set comprises: 4 x right hand rocker arms ...

Quality aftermarket Perkins 4.248 Rocker cover gasket upgrade. The Perkins 4.248 standard rocker cover gasket is made from cork. Our upgraded rock...

Quality aftermarket rocker shaft to fit all Perkins 4.248 engines UK, European and worldwide shipping available.

A quality aftermarket rocker shaft assembly for your Perkins 4.248 engine. Suitable for the following engine codes: LF 4.248 LG 4.24...