Perkins Engine Parts

High quality Perkins 400 series alternators 12V, 2 or 3-point and right hand mounting, earth return, to fit all versions (including marine) of thes...

Quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 4.236 (M90) These heat resistant plastic adapters are designe...

This quality aftermarket water pump (no pulley included) fits the turbo versions of the Perkins 4.236. (Pully shaft diameter is 19mm, Parallel with...

Aftermarket Perkins 4.236 sump bolt. This part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. Details: Diame...

We have good quality aftermarket pushrods available for Perkins 4.236. They have correctly hardened ends and fit all versions of these engines. Eq...

A quality aftermarket pre-filter / water separator / fuel filter for Perkins 4.236 with re-usable internal gauze strainer and glass bowl. This univ...

Quality aftermarket Perkins 4.203 Rear crankshaft oil seal. Equivalent to Perkins Part No. 2418F475 UK, European and Worldwide shipping available.

Quality aftermarket Perkins 4.154 oil filler cap. There are two sizes of filler cap used on Perkins 4.154 engines. The larger cap fits factory mari...

Perkins 4.154 sump bolt. This aftermarket part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. Diameter across...

A set of eight genuine Perkins 4.108 rocker arm bushes. UK, European and Worldwide delivery available.

A set of replacement heat exchanger and oil cooler seals for Perkins 4.107M early version. These are high quality nitrile rubber seals, manufacture...

Genuine Perkins fuel lift (Part No. ULPK0004) suitable for Perkins 3.154 Series engines. For engine build codes beginning CE, CM and CN Gasket inc...

High quality aftermarket connecting rod (big-end) bearings with sintered aluminium bearing faces. Fits all versions of the Perkins 4.154 (200 serie...

Genuine Perkins fuel injector leak off pipes / fuel return pipes for the Perkins 104.22 engine. UK, European and Worldwide delivery available.

A good quality aftermarket water pump Perkins 1103A, 1103C, 1103D & 1104D. It also comes with a gasket. To fit the following engine codes: ...

A genuine Perkins 1103 series oil filter - OE Part No. 2654403. Outside Diameter (O.D) 96mm, Thread size 3/4"-16 UNF, Height 131mm. Fits the follow...

A set of quality aftermarket Perkins 103.09 connecting rod bearings. For build code beginning KC, available in the following sizes: Standard -0....

Perkins 100 series aftermarket electric fuel lift pump. Perkins Part No. 485510011 Fits the following industrial engine versions with build codes b...

A genuine Perkins Perama series fuel filter - OE Part No. 4429491 (O.D. 78mm, Thread size 3/4-16 UNF, Height 89mm) Watch our fuel filter maintenanc...

A genuine Perkins 100 Series spin-on oil filter - OE Part No. 140517050. Outside Diameter (O.D) 77mm, Thread Size 3/4-16UNF, Height 85mm. Watch our...

A very comprehensive quality aftermarket overhaul kit for naturally aspirated Perkins T4.236 engines with a build code beginning 236 or LJ. (For Tu...

Genuine Perkins Prima M80T replacement head bolt set. These are high quality, original parts to fit all versions of this engine, includes: x4 Long...

Replacement 12V stop solenoid that fits Perkins Prima M80T engines fitted with the electrically operated stop solenoid that screws directly into th...

A set of high quality replacement valves and spring sets, as fitted to Perkins Prima M80T. Inlet valves x 4 Exhaust valves x 4 These valves ...

A quality aftermarket Perkins Phaser 1004 thermostat and housing with 'O' seal gasket. Thermostat opening temperature 82° C. Fits the following bui...

Genuine Perkins OE Phaser 1004 Piston cooling jet and banjo bolt. Fits the following build codes: AA AB AK AM AR YH UK, European, and Worldwide s...

Perkins Phaser 1004 connecting rods; high quality aftermarket parts complete with finished small end bush (35mm,38mm or 40mm) and big end nuts and ...

We stock two excellent quality replacement starter motors for the Perkins 100 series engine Perama M35 (KE - 103.15)They are manufactured by one of...

High quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for Perkins Perama M25 fitted with the bronze engine driven raw...

There are two sizes of filler cap used on Perkins M90. The larger cap fits factory marinized version, whilst the smaller cap fits automotive / indu...

Aftermarket Perkins P6 complete gasket set. A very comprehensive aftermarket set of quality gaskets and seals for the Perkins P6 engine. Cylinder ...

An aftermarket starter/ignition switch for Perkins M90 engines, We offer two switch options, which have either 4 pin or 6 pin electrical connection...

Quality aftermarket coolant drain tap for this Perkins M90 engine. This is a quality part and is fully machined from solid brass. Equivalent to Per...

Quality aftermarket Perkins cylinder head bolts for 1004, 1006, 6.354 and T4.236 engines Option A 1/2 inch UNF (Unified National Fine) 20 TPI  (Th...

Genuine Perkins 400D Series Oil filler cap. Details: x1 Cap x1 'O' Seal included Cap screw thread diameter 30mm To fit the following versio...

An Aftermarket Perkins Series Crankshaft Thrust Washer Set - Equivalent to OE Part Number 199266200.  Kit Includes: x2 Standard size thrust washer ...

Perkins 4.99 Top Gasket Set, a very comprehensive set of quality aftermarket gaskets and seals for the top end of your Perkins 4.99We strive to off...

A set of four aftermarket injector nozzles for Perkins 4.236. The nozzle is the only wearing part of the injector and with new injectors becoming ...

Replacement Perkins fuel filter assembly for Perkins 4.154 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.107, supplied with a high temperature switch. Ideal for marine use, as it gives ...

Perkins 4.107 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these engines via the tim...

Quality aftermarket Perkins 4.154 (200 series) main bearing set. No longer available from Perkins and manufactured by Parts4engines to the OE speci...

Quality aftermarket Perkins 1006 Cylinder Head Bolt Set, Details: x 2 1/2 UNF 129mm x18 1/2 UNF 108mm x12 1/2 UNF 92mm Long measurements t...

Genuine Perkins 100 series 103-09 engine piston ring set. For engines with build code beginning KC code with a 72 mm bore. Set includes: x3 Top ...

A very comprehensive set of aftermarket gaskets and seals traditionally manufactured from the highest quality gasketing materials. Suitable for Per...

A very comprehensive set of aftermarket gaskets and seals traditionally manufactured from the highest quality gasketing materials. To fit Perkins 1...

Parts4engines is excited to announce the return of Speedseal - renowned for its ease of use and lightning-fast impeller changes, even in the most c...

A genuine Perkins Perama M25 spin-on oil filter - OE Part No. 140517030. Outside Diameter (O.D.) 68mm,Thread size 3/4-16 UNF, Height 86mm. Watch ou...