Perkins Engine Parts

Genuine high quality Jabsco bronze sea water pump - Part No. 29500-1001, fitted as original equipment to all Perkins M80T engines. Includes: x1 Co...

Genuine Perkins OE thermostat with 44 mm diameter for Perkins Perama M35, engine code KE 103-15 UK, European and Worldwide shipping available.

A quality aftermarket glowplug for Perkins Perama M20 engines. Engine build code KB - 103-06 This is a 12 volt 'Rapid glow' type - and uses full b...

Aftermarket Perkins M20 Raw water pump manufactured in Italy by Ancor and offering a cost saving on OE Part No. 145017130.  Included: x1 M20 Raw w...

Quality aftermarket coolant drain tap for this Perkins M90 engine. This is a quality part and is fully machined from solid brass. Equivalent to Per...

Aftermarket Injector leak-off rail that fits all versions of the Perkins M90. It has threaded outlets at both ends and is quality anodized product....

Aftermarket Perkins D4.203 Oil Dip Stick, details: Length from inside tube cover cap to bottom of stick 19cm For build codes Beginning JE UK...

A set of five quality aftermarket Perkins M20 raw water pump cover plate gaskets - Part No. 840385 External diameter 63mm UK, European and Worldw...

A genuine Perkins 700 series fuel lift pump - Part no. ULPK0031. Also fits marine engine versions M65 and M85T. Kit includes: x1 Fuel lift pump x1...

A quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 6.354. These heat resistant plastic adapters are designed ...

Aftermarket Perkins 6.354 connecting rod non fractured, a top quality part that comes with small end bush fitted and reamed to size, together with ...

Replacement Perkins fuel filter assembly for Perkins 6.354 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

High quality Perkins 400 series alternators 12V, 2 or 3-point and right hand mounting, earth return, to fit all versions (including marine) of thes...

A Perkins 4.236 Crankshaft rear oil seal replacement kit. (Early type rope seal) Kit Includes A pair of braided seals A quality rear seal housi...

Quality aftermarket Coolant drain tap for this Perkins 4.236 engine. This is a quality part and is fully machined from solid brass. Equivalent to P...

Genuine OE Perkins alternator belts which are the correct fitments for Perkins 4.203 engines. Perkins Part No. 2614B650 *Please note that there are...

Replacement Perkins fuel filter assembly for Perkins 4.154 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

A genuine Perkins 4.248 Oil Filter - OE Part No. 26560090. Includes:x1 Oil filterx2 Sealing rings Watch our oil filter maintenance video for more i...

An aftermarket Perkins 4.107 sump bolt. This part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. This bolt is...

A quality set of standard size aftermarket thrust washers for Perkins 4.107 engines. Well engineered and offering excellent value. UK, European a...

A set of Perkins 3.152 aftermarket gaskets and seals to overhaul a CAV injector pump. Suitable for the mechanically governed pump. suitable for the...

Aftermarket front crankshaft oil seal for selected Perkins 4.236, 4.248, 6.354, Phaser 1004 and 1006, 1100 Series, Prima and M90 engines. Equivalen...

A quality aftermarket thermostat housing gasket to fit the following Perkins 100 series industrial engines with build codes beginning: 102.04 KA 1...

Parts4engines is excited to announce the return of Speedseal - renowned for its ease of use and lightning-fast impeller changes, even in the most c...

A set of four quality glowplugs to fit Perkins Prima M80T engines. Equivalent to Perkins Part Numbers 185366190 / T436932 Easy to change and a grea...

A set of high quality replacement valves and spring sets, as fitted to Perkins Prima M80T. Inlet valves x 4 Exhaust valves x 4 These valves ...

An original OE sea water pump drive coupling to fit Prima M60 engines (BA - 504-2) Perkins Part No. 3272X001 The pump is engine driven directly fro...

Replacement 12V stop solenoid that fits Perkins Prima M60 engines fitted with the electrically operated stop solenoid that screws directly into the...

Quality aftermarket Perkins Phaser 1006 Thermostat with the correct 82oC opening temperature. Equivalent to Perkins Part No. 2485613 Suitable ...

A very comprehensive set of quality aftermarket gaskets for the bottom end of your Perkins phaser 1006 engine. Please select the option button to a...

Perkins Perama M35 engine code KE 103.15 Complete gasket set, a very comprehensive set of high quality aftermarket gaskets and seals for this engin...

Perkins Perama M30 thermostat retaining spring - Part No. 198217400 A genuine OE Perkins replacement part to fit the engine code KD 103-10 UK, Euro...

A quality aftermarket Perama M20 high temperature switch that will work a warning light or alarm. Build code KB Please note this is not a sender t...

Quality aftermarket 12v heater plug (thermostat) for Perkins M90 . It can be supplied with either the 'spade' or alternative 'screw' type electrica...

Aftermarket Low Oil Pressure Alarm for Perkins 6.354 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

Aftermarket Perkins 404C-22 and 404D-22 Sump Gasket Sump gasket manufactured in the highest quality gasketing material. Includes x1 Sump gasket ...

A quality aftermarket Perkins 402C-05 Water pump - equivalent to Perkins 145017400 Suitable for 402C-05 engines, or build code beginning HB Inclu...

We offer 2 types of fuel lift pump for the Perkins 400 series industrial engines. The 1st option (Genuine Perkins) fits industrial engine codes be...

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.99 engines. total length = 50mm stud protrudes 37mm form cylinder head face Pe...

This quality aftermarket water pump (no pulley included) fits the turbo versions of the Perkins 4.236. (Pully shaft diameter is 19mm, Parallel with...

Aftermarket Water temperature sender that fits early Perkins 4.203 engines. Details: Spade type electrical connection 12v or 24v systems. Supplied...

We have good quality aftermarket pushrods available for Perkins 4.236. They have correctly hardened ends and fit all versions of these engines. Eq...

Quality aftermarket Perkins 4.154 oil filler cap. There are two sizes of filler cap used on Perkins 4.154 engines. The larger cap fits factory mari...

A good quality aftermarket Perkins 4.154 12v heater plug (thermostat). It can be supplied with either the 'spade' or alternative 'screw' type elect...

A set of eight genuine Perkins 4.108 rocker arm bushes. UK, European and Worldwide delivery available.

Quality aftermarket thermostat to fit Perkins 3.152 engines. 82oC opening temperature for automotive and industrial applications. To fit engines co...

Aftermarket water pump for selected 1103A / 1103C / 1103D / 1104D engines. Equivalent to OE part number U5MW0208. Kit Includes: x1 Water pump x1 W...

Genuine Perkins 103.10 connecting rod. A high quality part that comes with the small end bush fitted and reamed to size, also included are 2 big en...