Perkins Engine Parts

A set of replacement heat exchanger and (oil cooler lowline only) O seals. The early 4.99 4.107 & 4.108 kit comprises 4 Nitrile BS343 70S heat ...

A rare find! We have a small number of good, used Perkins 4.99 connecting rod available. Small end bushes are serviceable with no apparent wear.The...

Quality aftermarket Perkins 4.99 Core Plug set, details: Set of 9 Anodised mild steel core plugs x6  1 1/4" x1  1" x2  7/8" UK, European and Worl...

Quality aftermarket Exhaust elbow Outlet Gasket for Perkins 4.99 marine engines. Available for 4 or 5 hole outlets. UK, European and Worldwide ship...

A Perkins 4.99 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details:...

Quality aftermarket Perkins 4.248 Oil pump for naturally aspirated engines. Suitable for: LF - 4.248 LG - 4.2482 UK, European and worldwide ...

Aftermarket Perkins 4.248 Thermostat 70 mm (early version) with jiggle pin. To fit engine codes: LF - 4.248 LG - 4.2482 Opening temperature is 78 ...

Combined Bowman exhaust manifold and heat exchanger that fits Perkins 4.99. This is a high quality original equipment part as supplied by Perkins i...

Quality aftermarket Perkins 4.248 pushrods, with correctly hardened ends to fit the following versions of these engines: LF - 4.248 LG - 4.248...

Aftermarket starter/ignition switch for Perkins 4.99 engines, we offer two switch options, which have either 4 pin or 6 pin electrical connections ...

Excellent quality aftermarket alternator and water pump drive belts which are the correct fitment for standard Perkins 4.99 engines. These standard...

Genuine Jabsco bronze sea water pump as fitted to all Perkins 'UK factory marinised' versions of the Perkins 4.99 engine. The pump is engine driven...

We are pleased to offer fully reconditioned Perkins 4.99 DPA pumps. These are disassembled, completely cleaned, inspected and all worn parts are re...

High quality aftermarket Replacement 'standard impeller kits' and 'raw water pump service kits' for the factory marinised version of Perkins 4.99 f...

Perkins 4.99 Oil Filter Conversion kit. If you have one of the early marine versions of these engines with the paper oil filters inside a re-usabl...

Replacement Perkins fuel filter assembly for Perkins 4.99engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitting...

A set of quality aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.99. We stock both options for either the mechan...

A comprehensive aftermarket rear crankshaft oil seal upgrade kit for Perkins 4.99 engines. The 'Achilles heel' of these engine designs is the crank...

Quality aftermarket Perkins 4.236 & M90 Crankshaft Thrust block, for Crankshafts with a 3 bolt 'pully end' External diameter 56mm Comes wit...

Perkins 4.248 front crankshaft / timing cover oil seal, a quality aftermarket lip seal. UK, European and Worldwide shipping available.

Genuine OE Perkins alternator belts which are the correct fitment for Perkins 4.248 engines. *Please note that there are different belt lengths on ...

Perkins 4.248 quality aftermarket cylinder head bolt kit, specifications are: 140mm x2 120mm x12 103mm x8 Sizes (measur...

High quality Perkins 4.236 alternators 12V, earth and insulated returned, fit all versions (including marine) of these engines set up for a 'three ...

Aftermarket Perkins 4.236 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide shipping available.

An aftermarket Perkins 4.203 sump bolt. Details: To fit all sumps drilled to take a parallel thread (the majority) sump drain bolt Diameter acr...

UK, European and Worldwide shipping available.

Quality aftermarket Coolant drain tap for this Perkins 4.248 engine. This is a quality part and is fully machined from solid brass. These drain ta...

A high quality aftermarket part, this cylinder head (complete with valve train assembly) fits all naturally aspirated (non-turbo) versions of the ...

A very comprehensive set of high quality aftermarket gaskets and seals for the bottom end of your Perkins 4.248. Manufactured in the UK from the hi...

These 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.248 engines set up for a 'three lug' mounted alternator. The adj...

Aftermarket Perkins 4.236 Cam Followers (Valve Tapet) ideally replaced in a set. Fits versions: LD - 4.236 UK, European and Worldwide delive...

Set of 8 aftermarket replacement Connecting rod bolts & nuts for Perkins 4.236 UK, European and Worldwide delivery available.

Quality aftermarket engine overhaul kit for Perkins 4.203 engines includes the following parts: Inlet valves 45° or 35° x 4 Exhaust valves 45° ...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.236M early version. These are high quality nitrile rubber seals, manufacture...

Perkins 4.236M Heat exchanger end plate and gasket. This will fit the early version only. Original part number 37482171 UK, European and Worldwide ...

A set of 8 aftermarket Perkins 4.248 Connecting rod bolts & nuts, set contains: 8 Bolts 8 Nuts UK, European and Worldwide delivery avai...

Quality aftermarket Perkins 4.248 Cam Followers (Valve Tapet) ideally replaced in a set. Fits versions: LF - 4.248 UK, European and Worldwide shi...

Perkins 4.236 aftermarket Oil Pump turbo charged. These oil pumps are very well engineered and offer excellent value. It fits the following engine...

We now have new quality aftermarket crankshafts available for Perkins LF - 4.248 engine These can be supplied in lightweight or heavyweight versio...

Quality aftermarket Perkins 4.203 Rear crankshaft oil seal. UK, European and Worldwide shipping available.

A set of quality aftermarket Perkins 4.154 (200 series) Cylinder head valves, set includes: x4 Inlet valves x4 Exhaust valves Fits all GA build co...

We are pleased to offer fully reconditioned Perkins 4.154 (early UK and US version) injector pump service. Your pump is disassembled, completely cl...

High quality, aftermarket 12V earth return starter motor for Perkins 4.203. Fits all 'three lug' versions (including marine). 12V 2.8kW Fits bu...

Quality aftermarket oil filler cap. There are two sizes used on Perkins 4.203. The larger cap fits factory marinised version, whilst the smaller ca...

A genuine OE Perkins 4.203 oil pressure relief valve kit. It includes the following items: Plunger Spring Spring cap Cotter pin It fits: JD - 4....

Quality aftermarket 12v Perkins 4.154 alternator, fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator...

Quality aftermarket 12 Volt 65+ Amp, 'high output' alternators fit all versions (including marine) of Perkins 4.154 engines set up for a 'three lug...