Perkins 4.108 Engine Parts

A pair of high quality aftermarket end caps for the later versions of the Perkins 4108M marine engine fitted with 'Bowman' type heat exchanger. Th...

Quality aftermarket 4.108 'breather hose' kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory mari...

High quality Nautilus Fuel Master marine grade fuel hose. Specification: A1 grade, Lloyds approved and conforms to ISO 7840 2013 and SAE J1527 I...

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm ...

We can now offer an Repaired exhaust elbow connector for Perkins 4.108 marine engines. With time the original cast iron part will fail due to corro...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108 'lowline' engines. These are high quality nitrile rubber seals, manufact...

Perkins 4.108 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK, European and Worldwide shipping available.

High quality aftermarket Perkins 4.108 Jabsco raw water pump drive shaft coupling UK, European and Worldwide shipping available.

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.108 engines. Total length = 50mm Stud protrudes 37mm measured form cylinder he...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.108, supplied with a high temperature switch. Ideal for marine use, as it gives...

Aftermarket Perkins 4.108 drip rail; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins ha...

A set of aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.108. We stock both options for either the mechanically...

High quality aftermarket Perkins 4.108 Water pump back plate fitted between the water pump and the engine block. Equivalent to Perkins Part No. 024...

Genuine Perkins 4.108 Injector pipes to fit engines with a mechanically governed injector pump. (See photos to view a mechanically governed pump) ...

An aftermarket Perkins Injector Flange - Equivalent to OE Part No. 36173452. Suitable for Perkins 4.99, 4.107 and 4.108 engines. Injector clamps ca...

Aftermarket Delphi blanking plug kit for Filter Assembly Includes: x2 Blanking plugs (1/2"UNF thread) x2 Blanking plug copper washers x1 Air vent ...

Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel. Details: Add to the...

Liqui Moly Marine Diesel Protect, a solution for bacteria, yeast and mold, suitable for reliable long-term preservation. Maintains and protects th...

Liqui Moly Anti-bacterial Diesel additive is a highly effective biocide designed to protect against bacteria, yeast and mold. Ideally suited for pr...

Aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.108 with 2 options available: Earth return sender - uses the outer casing...

Aftermarket Low oil pressure alarm for Perkins 4.108 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK, European and Worldwide shipping available.

Genuine Perkins 4.108M replacement Exhaust outlet elbow. We offer two options with different positions for the water pipe connection, top or side....

Quality aftermarket Perkins 4.108M (Marine version to fit front mounted heat exchanger) coolant hose replacement kit, contains 5 hoses with stainl...

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aluminium aftermarket alternative, available in two versions, straight and 45 degre...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108 - Bowman Part No. 2486H005 This is a high quality original equi...

Quality aftermarket Perkins 4.108 Water pumps manufactured specifically for us and to our high quality requirements. They are available with either...

Quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for the factory marinized version of Perkins 4.108 fitted with the b...

Aftermarket Perkins 4.108 thermostat kit with the correct 82oC opening temperature for automotive and industrial applications. For marine applicati...

Quality aftermarket Perkins 4.108 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these...

Perkins 4.108 aftermarket stainless steel exhaust outlet elbow - equivalent to 413165509. Manufactured from 316 Stainless steel. This is a superbly...

High quality aftermarket Perkins 4.108 raw water pump mounting gaskets, to fit a 'Jabsco' raw water Pump Kit contains: x1 Pump to mounting plate...

MPM propeller shaft grease is specially developed for marine applications. The grease has a very high resistance to water washout and is therefore ...

Standard aftermarket ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and ...

A set of five quality aftermarket raw water pump cover plate gaskets. Outside diameter 76mm Equivalent to Pekins part number 0490785 Equi...

Lloyds Approved Nautilus Marine Exhaust Hose. This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced ...

Quality aftermarket adapter sleeve for the glow plug on marine versions of the Perkins 4.108. These heat resistant plastic adapters are designed to...

Quality aftermarket Perkins 4.108 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type electrical ...

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.108 fitted with electrically operated stop solenoid that screws...

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. Equivalent to Perkins 3...

A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Prod...

JB Marine Weld is a specially formulated two-part steel reinforced epoxy cold weld system that provides for strong, lasting repairs for bonding dif...

Perkins 4.108 Raw water pump alignment tool, used to centre the adaptor plate to ensure reduced wear on the drive shaft components as specified in ...

Quality aftermarket Perkins 4.108 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide delivery available.

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.108 engines. These standard bel...

Quality aftermarket 12 volt 65+ amp, 'high output' alternators fit all versions (including marine) of Perkins 4.108 engines set up for a 'three lug...

Quality aftermarket Perkins 4.108 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator....

High quality aftermarket This 12 volt Perkins alternator fits the Perkins 4.108 'lowline' marine engine. The adjuster arm securing bolt is at a 180...