Perkins 4.107 / 4.108M Engine Parts

Good quality aftermarket water temperature sender that fits the majority of early Perkins 4.107 engines. Details: Spade type electrical connection...

High quality aftermarket engine mounts for Perkins 4.107M marine engines. Fitting the correct type of mount for the weight and use of your engine i...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.107M early version. These are high quality nitrile rubber seals, manufacture...

Perkins 4.108 & 4.107 Rocker shaft assembly bracket. A genuine OE Perkins original part, fits all engine versions. UK, European and Worldwide ...

4An Aftermarket Perkins 4.108 / 4.107 / 4.99 / 4.154 Crankshaft Rear Seal Repair Kit. Product Details: Replacement rope seal manufactured from adv...

Quality aftermarket Perkins 4.108 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator....

Quality aftermarket 12 volt 65+ amp, 'high output' alternators fit all versions (including marine) of Perkins 4.108 engines set up for a 'three lug...

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.108 engines. These standard bel...

High quality aftermarket 12 volt 90 amp high output alternators fit all versions Perkins 4.108 (including marine) of these engines set up for a 'th...

A genuine Perkins 'spin -on' fuel filter assembly kit, to replace the original factory fitted 'cartridge type' filter housing or a Delphi 296 filte...

A very comprehensive set of quality aftermarket gaskets and seals for the bottom end of your Perkins 4.108, including marine versions. water pump ...

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aluminium aftermarket alternative, available in two versions, straight and 45 degre...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108 - Bowman Part No. 2486H005 This is a high quality original equi...

A genuine Bowman Filler neck assembly for a Bowman type heat exchanger as fitted on later versions of the Perkins 4.108 engine. Bowman Part No. 392...

A quality set of aftermarket Perkins 4.108 connecting rod bearings available in the following sizes: Standard -0.010" -0.020" -0.030" To h...

Quality aftermarket Perkins 4.108 Core Plug set, details: Set of 9 Anodised mild steel core plugs x6 1 1/4" x1 1" x2 7/8" UK, European and Worldw...

A quality aftermarket Perkins 4108 cylinder head gasket. Laminated gasket with additional silicon sealant around the water jacket areas. Fits all ...

Genuine Perkins 4.108 Cylinder head studs - Part No. 32524138  Details: Length 105mm Ø 11mm Please note these studs are not suitable for 4.99 or 4...

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. Equivalent to Perkins 3...

Aftermarket Perkins 4.108 drip rail; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins ha...

Quality aftermarket Perkins 4.108M (Marine version to fit front mounted heat exchanger) coolant hose replacement kit, contains 5 hoses with stainl...

A comprehensive aftermarket kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4.108 engine. Thi...

Quality aftermarket Perkins 4.108 exhaust elbow hose connector kit. Included are all the parts required to connect the Bowman heat exchanger end ca...

We can now offer an Repaired exhaust elbow connector for Perkins 4.108 marine engines. With time the original cast iron part will fail due to corro...

A pair of aftermarket Perkins 4.108 exhaust manifold gaskets - equivalent to 36862232. These are suitable for all versions of this engine.UK, Europ...

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.108 engines. Total length = 50mm Stud protrudes 37mm measured form cylinder he...

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK, European and Worldwide shipping available.

Replacement Perkins fuel filter assembly for Perkins 4.108 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

A genuine Perkins 4.108 fuel filter element - OE Part Number 30242. Paper element fuel filter for filter bowl type housings, fitted to early Perkin...

A genuine Perkins 4.108 fuel filter - OE Part No. 4326658 Cartridge type fuel filter. Fits within the fuel filter housing. (O.D 88mm, I.D. 20mm, He...

Perkins 4.108 diesel lift pump Kit - there are two types of lift pump used on these engines. 1. The 'two bolt' lift pump fits Perkins 4.108 early e...

A high-quality replacement aftermarket fuel line kit for your Perkins 4.108 with soft copper pipes cut oversized and supplied with a pipe cutter so...

Aftermarket Perkins 4.108 high quality water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimente...

High quality aftermarket Perkins 4.108 fuel pump push rod, made in Sheffield for parts4engines. (No longer available from Perkins). Details Length...

Aftermarket Fuel washers and seal kit for Perkins 4.108 Series engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washers x6 Fu...

A set of aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.108. We stock both options for either the mechanically...

A quality aftermarket glow plug for Perkins 4.108 engines - equivalent to 2666409 Fits late type cylinder heads, where the glowplug is directly sc...

Quality aftermarket adapter sleeve for the glow plug on marine versions of the Perkins 4.108. These heat resistant plastic adapters are designed to...

Quality aftermarket Perkins 4.108 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type electrical ...

Perkins manufactured three marinized versions of Perkins 4.108 engines over the years, each with different options for the header tank used. See ph...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108 'lowline' engines. These are high quality nitrile rubber seals, manufact...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.108, supplied with a high temperature switch. Ideal for marine use, as it gives...

Aftermarket starter/ignition switch for Perkins 4.108 engines, including marine versions. We offer two switch options, which have either 4 pin or 6...

Genuine Perkins 4.108 injector fixing studs. Details: x1 50mm long x1 40mm long UK, European and Worldwide shipping available.

Genuine Perkins 4.108 Injector pipes to fit engines with a mechanically governed injector pump. (See photos to view a mechanically governed pump) ...

Genuine Perkins 4.108 Injector pipes to fit the lowline marine engine version, with the following build codes: ED13630, ED13631, ED22111, ED22714,...

A pair of genuine Perkins 4.108 Injector pump drive shaft bushes to fit the later type of drive shaft 31.7 mm (1.25''). Perkins Part No. 2511447 (x...

Perkins 4.108 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK, European and Worldwide shipping available.