Marine Engine Parts

A quality aftermarket glowplug for Perkins Perama M20 engines. Engine build code KB - 103-06 This is a 12 volt 'Rapid glow' type - and uses full b...

A genuine replacement oil pump Perkins Perama M20 - engine code KB - 103.06 UK, European and Worldwide shipping available.

A quality set of aftermarket thrust washers for Perkins 4.99 engines. Please note that they are standard size. The set is manufactured for us to st...

Low oil pressure alarm for Perkins 4.99 is a quality aftermarket bulkhead mounted warning alarm, to be used in conjunction with an oil pressure swi...

Quality aftermarket 12 to 24v oil pressure sender for Perkins 4.99 with 2 options available: Earth return sender - uses the outer casing to provid...

High quality aftermarket Perkins 4.99 coolant inlet connector. This is the short tube that is pressed into the block just below the alternator posi...

Quality aftermarket 12 Volt 90 Amp Insulated return high output alternator for Perkins M20 marine engines set up for a 'three lug' mounted alternat...

High quality aftermarket Perkins 4.99 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to t...

A genuine OE Perkins 4.99 oil pressure relief valve kit. It includes the following items: Plunger Spring Spring cap Cotter pin UK, European and W...

Perkins 4.99 pre-combustion chamber insert These are quality genuine Perkins parts and are suitable for all Perkins 4.99 engines. We also now inclu...

High quality aftermarket Perkins 4.99 Jabsco raw water pump drive shaft coupling. UK, European and Worldwide shipping available.

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.99 engines. total length = 50mm stud protrudes 37mm form cylinder head face U...

The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes...

Standard oil cooler designed for use on marine transmissions from Bowman for Perkins 4.99. Features cupro-nickel tubes for long life expectancy and...

A replacement aftermarket fuel line kit for your Perkins 4-99 with soft copper pipes cut over sized and supplied with a pipe cutter so you can achi...

A pair of aftermarket Perkins 4.99 exhaust manifold gaskets. These are suitable for all versions of this engine and fit between the cylinder head a...

Aftermarket fuel washers and seal kit for Perkins 4.99 Series engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washer...

Perkins 4.108 fuel pump push rod, made in Sheffield for parts4engines. (No longer available from Perkins). Details Length 93mm Diameter 9.5mm UK,...

Genuine Perkins 4.108 drive gears, USED but in excellent condition. These were removed from a Ex-MOD auxiliary generator (very low hour use )The o...

Quality aftermarket Perkins 4.108 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator....

An aftermarket Perkins 4.99 drip rail; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins ...

This quality set of aftermarket main bearings fit all versions of Perkins 4.99 engine. They can be supplied at the following sizes: Standard -0.01...

A quality aftermarket set of connecting rod bearings fit Perkins 4.99 engine. They can be supplied in the following sizes: Standard -0.010" -0.020...

Aftermarket Rocker cover gasket and seals set for Perkins 4.99 engines. This set will stop your cover leaking oil and fits all versions of this eng...

A comprehensive kit which includes the major components that you will need to overhaul your tired cylinder head on your Perkins 4.99 engine. The ki...

Perkins 4.99 Water temperature sender, an aftermarket replacement to fit the majority of these engines. Spade type electrical connection For 12v o...

High quality Liqui Moly Marine Anti-Limescale 5L. This is a water based solution with inorganic acid to remove limescale deposits within engine coo...

High quality Blue Water 12 or 24v automatic battery charging kit designed in the USA. The kit includes two products, a Dual Circuit Plus battery sw...

Quality aftermarket Perkins 4.107 raw water pump mounting gaskets, to fit a 'Jabsco' raw water Pump Kit contains: x1Pump to mounting plate gasket ...

Genuine Perkins 4.108 connecting rod. Complete with fitted small end bush. UK, European and Worldwide shipping available.

A set of lubricating oil and fuel filters for servicing your Perkins 4.107 engine. The set comes with seals for each of the filters. There are two...

A Perkins 4.107 aftermarket water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimenter is very u...

A Perkins 4.107 tab washer kit includes: x1 Flywheel locking tab washer - prevents the flywheel to crank bolts from working loose x1 Idle gear loc...

Bowman oil cooler end cover for Perkins 4.107Dimensions are: Internal hole size 52 mm and 28 mm length 55 mm UK, European and Worldwide delivery ...

High quality aftermarket Perkins 4.107 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted altern...

A replacement aluminium thermostat housing to fit Perkins 4.107 marine engines. Kit includes: Thermostat housing Housing gasket Hylomar sealant To...

Quality aftermarket 12 Volt 90 Amp Insulated return high output alternator for Perkins 4.107 marine engines set up for a 'three lug' mounted altern...

Perkins 4.107 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK, European and Worldwide shipping available.

A quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 4.107. These heat resistant plastic adapters are designed t...

Replacement aftermarket standard impeller kits, raw water pump service and rebuild kits for Yanmar 3HM35 fitted with the bronze engine driven raw w...

A quality Raw water pump end cover kit for Yanmar 3HM35 engines. The end covers on these pumps tend to wear, resulting in poor sealing of the impel...

A set of A2 Stainless steel Exhaust Outlet fixing bolts, includes  x3 A2 bolts 80mm long x1 A2 bolt 60mm long x4 A2 Stainless Steel spring washers...

Volvo Penta 2000 Series fuel return pipe banjo bolt with washers. To fit engine versions 2001, 2002, 2003 and 2003T UK, European and Worldwide sh...

Hi quality aftermarket Perkins M20 Injector washer set, Set includes: x3 injector copper washers (fitted between the injector and the cylinder hea...

Excellent quality aftermarket Piston with rings for Yanmar 2GM20 engines, offering considerable savings on genuine Yanmar parts. Details: Includes...

A genuine Volvo Penta expansion tank Pressure Cap. Suitable for  D1-13, D1-20, D1-30, D2-40, D2-50 D2-55, D2-75, MD2010. MD2020, MD2030, MD2040, M...

Quality aftermarket Perkins 403J-11 Crankshaft. To fit engine versions, D1-30, D1-30B and D1-30F UK, European and Worldwide shipping available 

Genuine Perkins M30 Injector insert. Fits between the injector cap and the copper sealing washer UK, European and Worldwide shipping available.