Industrial Engine Parts

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Opt...

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synth...

High quality aftermarket fuel banjo bolt set, includes: x4 Banjo bolts UK, European and Worldwide shipping available.

Perkins 100 series injector leak off pipes (fuel return pipes) - genuine Perkins replacement parts For the engine codes: KB - 103.06 and KN - 103....

High quality genuine Perkins oil filters for the Perkins 100 Series range of engines. We offer two filter versions with different diameters: Choose...

Thermostats for the full range of Perkins 100 series engines. There are two types used on these engines. Genuine Perkins 34mm diameter for engine ...

A very comprehensive set of aftermarket gaskets and seals traditionally manufactured from the highest quality gasketing materials. To fit Perkins 1...

We stock the full range of water pumps for these Perkins 100 series engines. See below for which pump type fits your engine version. For engine ty...

Genuine Perkins OE Fuel filter for the Perkins 100 Series range of engines 'Spin-on' filter (diameter 78 mm) to fit: KB - 103-06 KC - 103-09 KD - ...

Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel. Details: Add to the...

Top quality alternator and water pump belt which is the correct fitment for standard engines like Perkins 100 Series. These belts are produced by '...

A set of genuine Perkins head bolt for the Perkins 100 series engine. For engine codes: KA 102-04 KN 102-05 KB 103-06 KL 103-07 KC 103-09 KS 103-...

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Syn...

A set of quality aftermarket Perkins 103.10 connecting rod bearings. For build code beginning KD, available in the following sizes: Standard -...

Liqui Molly Battery Clamp Grease. A Specially formulated grease that protects battery terminals and electrical contacts from corrosion and oxidatio...

Standard ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engin...

Genuine and aftermarket Perkins cylinder head valve sets to fit 100 series engines. Options are: For 102.04 & 102.05 the set includes: 2 exhau...

Perkins 100 series 103-10 engine piston ring set. For engines with build code beginning KD code with a 75 mm bore. Set includes: x3 Top ring -...

A quality glowplug for all versions of these engines Perkins 100 Series. Easy to change and a great help to cold starting. This is a 12 volt 'Rapid...

Quality after-market or genuine oil pump for Perkins 100 SeriesThere are several variants on this oil pump that are fitted to the range of 100 seri...

A comprehensive aftermarket Engine Overhaul Kit for Perkins 100 Series engine code KD 103.10 which includes the major components that you will need...

Perkins 100 series thermostat retaining spring, a genuine Perkins replacement part to fit the following engine codes: KB, KC, KD, KDC, KDG, KE, KF,...

Heat exchanger header tank cap to fit all versions of these 100 series engines including marine versions Perkins M20 / M25 / M30 / M35 fitted with ...

Genuine (Metric) Delphi universal fuel filter assembly ideal for mounting between the fuel tank and engine as a auxiliary filter or as a replacemen...

A comprehensive aftermarket set of gaskets for a Perkins 100 series build code KF 104.19 industrial. This gasket set includes the following parts: ...

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overh...

Quality aftermarket Perkins 100 Series oil pressure switch. This switch can be configured to operate a warning light or alarm buzzer. (Please note)...

A Genuine Perkins 100 series water pump back plate. This plate is located between the water pump and the engine block. Suitable for build code KD -...

Quality aftermarket Perkins 100 series Fuel stop solenoid with 'O' seal , to fit the following build codes. KA30213 KA30214 KA30215 KA3028...

ExoPro 15W-40 is a high performance multigrade mineral engine oil suitable for use in a wide variety of petrol and diesel engines. It is is suitabl...

A genuine Perkins high temperature switch that will work a warning light or alarm. Please note this is not a sender to work a gauge For engine code...

Perkins 100 series engine cooling fan. This is a genuine Perkins replacement part and will fit the following industrial engine versions: Engine (co...

Quality aftermarket and genuine Perkins fuel lift pumps for Perkins 100 series industrial engines. These pumps are well engineered and represent ex...

Low oil pressure alarm for Perkins 100 series or marine version Perama M20, M25, M30, M35, MC42 is a quality bulkhead mounted warning alarm, to be ...

A quality set of main bearings with (bush) to fit all versions of Perkins 103.10 engines, build code KD. The following sizes are available: Standa...

Perkins 100 Series 103.10 sump gasket. This is an aftermarket gasket traditionally manufactured in the UK from the highest quality gasketing materi...

A quality exhaust manifold gasket Suitable for: KC - 103.09 KD - 103.10 KE - 103.15 KS - 103.11 UK, European and worldwide shipping available.

High quality Perkins 100 series alternators 12V, 2 and 3 bolt, earth and insulated return, to fit all versions (including marine) of these engines....

We stock excellent quality replacement starter motors for Perkins 100 series engines, manufactured by one of the Bosch group of companies. To fits ...

An original genuine replacement oil filler cap to fit your Perkins 100 series engine. Thread diameter 41mm Height 27mm To fit the following 100 s...

A genuine Perkins 103.12 & 103.13 fuel return pipe, to fit the following build codes: KG, 103.12 KH, 103.13 UK, European and Worldwide shippi...

A very comprehensive set of aftermarket gaskets and seals traditionally manufactured from the highest quality gasketing materials. To fit Perkins 1...

Perkins 100 series engine code KH 103.13 Complete Gasket set. A comprehensive set of quality aftermarket gaskets and seals traditionally manufactu...

A very comprehensive set of aftermarket gaskets and seals traditionally manufactured from the highest quality gasketing materials. Suitable for Per...

Perkins 100 series engine code KE 103.15 Complete Gasket set, a comprehensive set of quality aftermarket gaskets and seals traditionally manufactur...

Hi quality aftermarket Perkins 103.10 Injector washer set, Set includes: x3 injector copper washers (fitted between the injector and the cylinder ...

Injector cap for Perkins 103.10  This part fits between the injector nozzle and the 'head' insert. Volvo part number 3580385 UK, European and Wor...

A set of genuine Perkins 103.10 Cylinder head bolts.  details: To fit engine code beginning KD x11 Bolts 86mm long (measured from under bolt head)...