Perkins 4.108M Engine Parts

High quality aftermarket fuel banjo bolt set, includes: x4 Banjo bolts UK, European and Worldwide shipping available.

Delphi fuel filter assembly Drain Plug and sealing washer. Thread diameter 7.5mm UK, European and worldwide shipping is available.

High quality Nautilus Fuel Master marine grade fuel hose. Specification: A1 grade, Lloyds approved and conforms to ISO 7840 2013 and SAE J1527 I...

Perkins manufactured three marinized versions of Perkins 4.108 engines over the years, each with different options for the header tank used. See ph...

High quality aftermarket Perkins 4.108 Water pump back plate fitted between the water pump and the engine block. Equivalent to Perkins Part No. 024...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108 'lowline' engines. These are high quality nitrile rubber seals, manufact...

Quality aftermarket Perkins 4.108 Water pumps manufactured specifically for us and to our high quality requirements. They are available with either...

Aftermarket Perkins 4.108 thermostat kit with the correct 82oC opening temperature for automotive and industrial applications. For marine applicati...

A pair of high quality aftermarket end caps for the later versions of the Perkins 4108M marine engine fitted with 'Bowman' type heat exchanger. Th...

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK, European and Worldwide shipping available.

A genuine Perkins 4.108 fuel filter element - OE Part Number 30242. Paper element fuel filter for filter bowl type housings, fitted to early Perkin...

Quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for the factory marinized version of Perkins 4.108 fitted with the b...

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.108 fitted with electrically operated stop solenoid that screws...

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm ...

Quality aftermarket 4.108 'breather hose' kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory mari...

A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Prod...

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.108 engines. These standard bel...

Quality aftermarket starter solenoids from Prestolite suitable for Perkins 4.108 inertia type starter motors fitted to automotive' or a marine eng...

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. Equivalent to Perkins 3...

We can now offer an Repaired exhaust elbow connector for Perkins 4.108 marine engines. With time the original cast iron part will fail due to corro...

Genuine Perkins 4.108M replacement Exhaust outlet elbow. We offer two options with different positions for the water pipe connection, top or side....

Perkins 4.108 aftermarket stainless steel exhaust outlet elbow - equivalent to 413165509. Manufactured from 316 Stainless steel. This is a superbly...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108 - Bowman Part No. 2486H005 This is a high quality original equi...

Perkins 4.108 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK, European and Worldwide shipping available.

High quality aftermarket Perkins 4.108 Jabsco raw water pump drive shaft coupling UK, European and Worldwide shipping available.

Quality aftermarket Perkins 4.108 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impell...

A set of five quality aftermarket raw water pump cover plate gaskets. Outside diameter 76mm Equivalent to Pekins part number 0490785 Equi...

Perkins 4.108 Raw water pump alignment tool, used to centre the adaptor plate to ensure reduced wear on the drive shaft components as specified in ...

Quality aftermarket Perkins 4.108 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide delivery available.

Upgrade your maintenance tool box with a pair of our Raw Water Pump Impeller Removal Levers. Innovatively designed and manufactured by Parts4Engine...

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare se...

Lloyds Approved Nautilus Marine Exhaust Hose. This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced ...

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aluminium aftermarket alternative, available in two versions, straight and 45 degre...

Quality aftermarket Perkins 4.108 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these...

Quality aftermarket Perkins 4.108M (Marine version to fit front mounted heat exchanger) coolant hose replacement kit, contains 5 hoses with stainl...

High quality aftermarket Perkins 4.108 raw water pump mounting gaskets, to fit a 'Jabsco' raw water Pump Kit contains: x1 Pump to mounting plate...

Standard aftermarket ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and ...

Aftermarket starter/ignition switch for Perkins 4.108 engines, including marine versions. We offer two switch options, which have either 4 pin or 6...

12V 33RA 60A 4 Pin Split Charge Relay – Aftermarket This 12 volt split charge relay is a quality aftermarket alternative to the original Lucas unit...

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.108, supplied with a high temperature switch. Ideal for marine use, as it gives...

A quality aftermarket glow plug for Perkins 4.108 engines - equivalent to 2666409 Fits late type cylinder heads, where the glowplug is directly sc...

Quality aftermarket adapter sleeve for the glow plug on marine versions of the Perkins 4.108. These heat resistant plastic adapters are designed to...

Quality aftermarket Perkins 4.108 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type electrical ...

Aftermarket Low oil pressure alarm for Perkins 4.108 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure sw...

Quality aftermarket 12 volt 65+ amp, 'high output' alternators fit all versions (including marine) of Perkins 4.108 engines set up for a 'three lug...

High performance electrical relay with mounting bracket suitable for high current switching. Details: 12v 100 amp Dimensions 4.5cm x 4.5cm x 7...

Quality aftermarket Perkins 4.108 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator....

High quality aftermarket 12 volt 90 amp high output alternators fit all versions Perkins 4.108 (including marine) of these engines set up for a 'th...