Perkins 4.107 / 4.108M Engine Parts

High quality aftermarket Perkins 4.107 coolant inlet connector. This is the short tube that is pressed into the block just below the alternator pos...

Quality aftermarket Perkins 4.107 Water pump back plate fitted between the water pump and the engine block. Two options are available: Mild stee...

High quality aftermarket Perkins 4.107 Water pumps manufactured specifically for us. They are available with either the standard pulley for a 12 mm...

Good quality aftermarket water temperature sender that fits the majority of early Perkins 4.107 engines. Details: Spade type electrical connecti...

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth c...

High quality aftermarket engine mounts for Perkins 4.107M marine engines. Fitting the correct type of mount for the weight and use of your engine i...

A set of replacement heat exchanger and oil cooler seals for Perkins 4.107M early version. These are high quality nitrile rubber seals, manufacture...

Perkins 4.108 & 4.107 Rocker shaft assembly bracket. A genuine OE Perkins original part, fits all engine versions. UK, European and Worldwide ...

Quality aftermarket Perkins 4.108 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator....

Quality aftermarket 12 volt 65+ amp, 'high output' alternators fit all versions (including marine) of Perkins 4.108 engines set up for a 'three lug...

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.108 engines. These standard bel...

High quality aftermarket 12 volt 90 amp high output alternators fit all versions Perkins 4.108 (including marine) of these engines set up for a 'th...

A very comprehensive set of quality aftermarket gaskets and seals for the bottom end of your Perkins 4.108, including marine versions. water pum...

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details...

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108. This is a high quality original equipment part as supplied by ...

A genuine Bowman Filler neck assembly for a Bowman type heat exchanger as fitted on later versions of the Perkins 4.108 engine. Thread size 1 1/...

Genuine Bowman 3366 oil cooler end cover for Perkins 4.108Dimensions are: Internal hole size 52 mm and 28 mm length 55 mm UK, European and W...

Genuine Bowman Standard oil cooler designed for use on marine transmissions for Perkins 4.108. Features cupro-nickel tubes for long life expectancy...

Quality aftermarket 4.108 'breather hose' kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory mari...

Genuine Perkins 4.108 connecting rod. Complete with fitted small end bush. UK, European and Worldwide shipping available.

A quality set of aftermarket Perkins 4.108 connecting rod bearings available in the following sizes: Standard -0.010" -0.020" -0.030" To h...

Quality aftermarket Perkins 4.108 Core Plug set, details: Set of 9 Anodised mild steel core plugs x6 1 1/4" x1 1" x2 7/8" UK, European and...

Perkins 4.108 crankshaft this is a quality aftermarket product manufactured to OE specifications. Fits all versions of these engines including mari...

Aftermarket Rear crankshaft Repair kit, the 'Achilles heel' of Perkins 4.108 design is the crankshaft rear rope seal which is notorious for leaking...

A quality aftermarket Perkins 4108 cylinder head gasket. Laminated gasket with additional silicon sealant around the water jacket areas. Fits a...

Genuine Perkins 4.108 Cylinder head studs, details: Length 105mm Ø 11mm Please note these studs are not suitable for 4.99 or 4.107 engines ...

We are pleased to offer a Perkins 4.108 DPA injector pump repair service . The pumps are disassembled, completely cleaned, inspected and worn parts...

We are pleased to offer fully reconditioned Perkins 4.108 injector pump. These pumps are disassembled, completely cleaned, inspected and all worn p...

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. These drain taps have ...

Aftermarket Perkins 4.108 drip rail; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins ha...

Quality aftermarket Perkins 4.108M (Marine version to fit front mounted heat exchanger) coolant hose replacement kit, contains 5 hoses with stainl...

A comprehensive aftermarket kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4108 engine This...

Quality aftermarket Perkins 4.108 exhaust elbow hose connector kit. Included are all the parts required to connect the Bowman heat exchanger end ca...

We can now offer an Repaird exhaust elbow connector for Perkins 4.108 marine engines. With time the original cast iron part will fail due to corros...

A pair of aftermarket Perkins 4.108 exhaust manifold gaskets. These are suitable for all versions of this engine. UK, European and Worldwide shipp...

A set of 4 genuine Perkins exhaust manifold studs, to fit Perkins 4.108 engines. Total length = 50mm Stud protrudes 37mm measured form cylinder he...

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK, European and Worldwide shipping available.

Perkins 4.108 front crankshaft / timing cover oil seal, a quality aftermarket lip seal. UK, European and Worldwide shipping available.

A genuine Perkins OE fuel filter for servicing your Perkins 4.108 engine. This filter was fitted to the earlier versions of the 4.108 engine. UK, ...

A genuine Perkins 4.108 fuel filter. Includes: x1 Fuel filter x3 Sealing rings UK, European and Worldwide available.

Replacement Perkins fuel filter assembly for Perkins 4.108 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fitti...

Perkins 4.108 diesel lift pump Kit - there are two types of lift pump used on these engines. 1. The 'two bolt' lift pump fits Perkins 4.108 early e...

A high-quality replacement aftermarket fuel line kit for your Perkins 4.108 with soft copper pipes cut oversized and supplied with a pipe cutter so...

Aftermarket Perkins 4.108 high quality water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimente...

Perkins 4.108 fuel pump push rod, made in Sheffield for parts4engines. (No longer available from Perkins). Details Length 93mm Diameter 9.5mm ...

Fuel washers and seal kit for Perkins 4.108 Series engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washers x6 Fuel filt...

A set of aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.108. We stock both options for either the mechanically...

A quality aftermarket glowplug for Perkins 4.108 engines. Fits late type cylinder heads, where the glowplug is directly screwed into the cylinde...