Produkter

Rear crankshaft upgrade kit for Perkins 4.154. The 'Achilles heel' of these engine designs is the crankshaft rear rope seal, which is notorious for...

A set of quality aftermarket Perkins 4.154 Cylinder head valves, set includes: x4 Inlet valves x4 Exhaust valves UK, European and Worldwide shipp...

A quality aftermarket fuel lift pump for Perkins 4.154 engines, including marine versions. These pumps are very well engineered and excellent value...

We are pleased to offer fully reconditioned Perkins 4.154 (early UK and US version) injector pump service. Your pump is disassembled, completely cl...

A quality aftermarket coolant drain tap for the Perkins 4.154 engine. Fully machined from solid brass. These drain taps have tapered threads and f...

A comprehensive aftermarket kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4154 engine. Thi...

We can now offer an upgraded exhaust elbow connector for Perkins 4.154 kit for marine engines. Manufactured from 316 Stainless steel this 'fit an...

Quality aftermarket Perkins 4.154 exhaust outlet gasket as used on the marine versions. UK, European and Worldwide delivery available.

Perkins 4.154 Front (crankshaft) timing cover oil seal, a quality aftermarket lip seal. UK, European, and Worldwide shipping available.

A genuine Perkins 4.154 fuel filter. Includes: x1 Fuel filter x3 Sealing rings UK, European and Worldwide available.

Replacement Perkins fuel filter assembly for Perkins Perkins 4.154 engines. This genuine Delphi quality part has the correct 1/2" UNF thread origin...

A high quality aftermarket pre-filter / water separator / fuel filter for Perkins 4.154 engines with re-usable internal gauze strainer and glass bo...

Fuel washers and seal kit for Perkins 4.154 engines. Kit Includes: x4 Injector copper washers x8 Fuel return pipe washers x6 Fuel filte...

A comprehensive set of quality aftermarket gaskets and seals to overhaul your Perkins 4.154 CAV DPA fuel pump. We stock both options for either the...

A pair of good quality aftermarket end caps for the later versions of the Perkins 4.154 marine engine fitted with Bowman type heat exchanger. These...

A high quality aftermarket Perkins 4.154 heat exchanger cap. Details: Outside diameter 70mm Seal diameter 52mm Height 25mm 7lbs UK, Europe...

An aftermarket starter/ignition switch for Perkins 4.154 engines. We offer two switch options, which have either 4 pin or 6 pin electrical connecti...

Perkins 4.154 injector (Refurbishment). These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We...

Low oil pressure alarm for the Perkins 4.154 engine is a simple bulkhead mounted warning alarm, to be used in conjunction with an oil pressure swit...

Perkins 4.154 main bearing set. No longer available from Perkins and manufactured by Parts4engines to OE specification. These bearings are high qua...

Quality aftermarket Perkins 4.154 oil filler cap. There are two sizes of filler cap used on Perkins 4.154 engines. The larger cap fits factory mari...

Genuine OE Perkins lubricating oil filter for Perkins 4.154 engines. This Filter will fit the earlier UK/US version of these engine UK, European...

Our standard aftermarket single spade oil pressure switch fits Perkins 4.154 that take an earth supply from the engine block. It has a tapered scre...

A high quality aftermarket piston ring kit for your Perkins 4.154 engine. To fit the 5 ring pistons used on all UK and US versions of these engines...

A quality aftermarket Perkins 4.154 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impe...

Aftermarket Perkins 4.154 standard impeller kits to fit Jabsco 11850-0711 and 11850-0701 raw water pumps. Impeller diameter 57mm Shaft diameter 16...

High quality aftermarket rocker cover gasket and seals set that will stop your cover leaking oil and fits all Perkins 4.154 UK/US versions of this ...

We are now pleased to offer a Perkins 4.154 Exhaust outlet elbow kit, manufactured from 316 Stainless steel. This is a superbly engineered aftermar...

Top quality aftermarket starter solenoids suitable for automotive and marine applications. Our automotive version is suitable for applications wher...

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.154 fitted with electrically operated stop solenoid that screws...

Perkins 4.154 sump bolt. This aftermarket part will fit all sumps drilled to take a parallel thread (the majority) sump drain bolt. Diameter across...

A good quality aftermarket Perkins 4.154 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type elec...

Quality aftermarket Perkins 4.154 series thermostat, details: 82°C thermostat opening temperature. Main diameter 54 mm, Thermostat includes jiggle...

A very comprehensive set of quality aftermarket gaskets and seals for the top end of your Perkins 4.154. The set includes: Cylinder head gasket ...

A set of 8 aftermarket Perkins 4.154 Cylinder head valve guides, details: Height 54mm Outside diameter 12.73mm UK delivery is by signed for couri...

A quality aftermarket water pump for Perkins 4.154 engines. Specification: Bolt hole spacing 47mm (see dimensional drawings in photos above) I...

An aftermarket water temperature sender that fits early Perkins 4.154 engines. Spade type electrical connection for 12v or 24v systems. Supplied wi...

High quality aftermarket engine mounts for Perkins 4.154 marine engines. Fitting the correct type of mount for the weight and use of your engine is...

These 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.203 engines set up for a 'three lug' mounted alternator. The adj...

Genuine OE Perkins alternator belts which are the correct fitments for Perkins 4.203 engines. *Please note that there are different belt lengths on...

Aftermarket Perkins 4.203, D4.203 & 4.203.2 bottom gasket and seals set, a very comprehensive set of quality gaskets and seals for the bottom e...

Quality aftermarket Perkins 4.203 connecting rod, a top quality part that comes with small end bush fitted and reamed to size, together with big en...

A quality set of aftermarket Perkins 4.203 connecting rod (big-end) bearings with sintered aluminium bearing faces. To fit all versions of the 4.20...

Perkins 4.203 aftermarket crankshaft representing excellent value. Details: This crankshaft is suitable for used with a rear rope seal and canno...

A quality set of aftermarket main bearings for Perkins 4.203 engines. Available in the following sizes: Standard -0.010" -0.020" -0.030" ...

Quality aftermarket Perkins 4.203 cylinder head assembly, direct injection version, comes complete with the following: Inlet and exhaust valves...

Quality aftermarket coolant drain tap for this Perkins 4.203 engine. Details: Fully machined from solid brass. These drain taps have tapered th...

A very comprehensive aftermarket overhaul kit which includes the major components that you will need to overhaul your tired and smoking Perkins 4.2...